Lighting for Gardens Navigator Minor 12v miniature led lights for decks & paving

This is a print preview page, please click here to print

To go back to the website, please click cancel preview

Lighting for Gardens - UK garden and outdoor lighting

Printed from lightingforgardens.com - come back to order online or email your queries to sales@lightingforgardens.com

WHAT OUR CUSTOMERS SAY...

"My goods arrived today; my lighting is of very high quality and I am very pleased with your excellent website.

Apart from showing a great range of products it gives good advice and generates confidence in planning garden schemes."

R P, Milton Keynes

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

Navigator Minor 12v miniature led lights for decks & paving

Recessed white led deck light in copper for a natural appearance in the garden, especially hardwood decks

Small l.e.d light used to outline a deck or paving or to mark step risers, these miniature 12v recessed deck lights are available with a choice of 2 led colours - white and blue - & stainless steel, natural copper or fine textured brass finishes. 0.3w light emitting diode (led) combines low energy outdoor lighting and long life with easy outdoor inatsllation - they are all 12v for parallel wiring, looping through from one led light to another from one standard exterior wire-wound garden lighting transformer or dc power supply

Printer Friendly Page

Select the specific model required by clicking in the drop down boxes below to see full details, price and stock availability.

[Back to top]

E3111B_N: Navigator Minor - Stainless Steel - 12v - Blue LED - Round

Price (ex VAT):

E3111B-N is a blue l.e.d deck and recessed light which consumes a tiny amount of power and stays cool to the touch. The 0.3w led produces a wide 800 beam diffused by the 16mm diameter frosted lens. They are used either to mark out the shape of a deck, patio or terrace, to outline paths and to provide marker lighting in step risers. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led recessed garden lights at about 60cm - 1m apart in step risers, space them about 60cm apart along the centre line of the riser

Colour/Finish:	Smart 316 grade stainless steel is a popular choice for modern garden settings
IP Rating:	IP67
Construction:	Each light contains long life high-output l.e.d resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking, sleeper walls and other materials using a 28mm wood drill bit. Diameter 40mm (sleeve 32mm; 28mm cutout without sleeve) recess depth 75mm. The top section can be unscrewed to allow insertion of theatrical coloured gels.
Input Voltage:	12v 0.5w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Lamp Type:	0.5w blue l.e.d
Installation:	Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.

Navigator Minor Round deck & recessed light dimensions

Navigator Minor Round stainless steel deck & recessed light with blue l.e.d.

Navigator Minor deck & recessed light specification

Download Navigator catalogue pages

In stock (75)

Qty

Buy

E3111W_N: Navigator Minor - Round - Stainless Steel - White Led

Price (ex VAT):

E3111W-N is a white l.e.d. deck and recessed light which consumes a tiny amount of power and stays cool to the touch. The 0.3w led produces a wide 800 beam diffused by the 16mm diameter frosted lens. They are used either to mark out the shape of a deck, patio or terrace, to outline paths and to provide marker lighting in step risers. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led recessed garden lights at about 60cm - 1m apart in step risers, space them about 60cm apart along the centre line of the riser

Colour/Finish:	Smart 316 grade stainless steel is a popular choice for modern garden settings
IP Rating:	IP67
Construction:	Each light contains long life high-output l.e.d’s resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking sleeper walls and other materials using a 28mm wood drill bit. Diameter 40mm (sleeve 32mm; 28mm cutout without sleeve); recess depth 75mm. The top section can be unscrewed to allow insertion of theatrical coloured gels
Input Voltage:	12v 0.5w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Lamp Type:	0.5w white l.e.d.
Installation:	Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit. stability.

Navigator Minor Round stainless steel deck & recessed light with white l.e.d.

Download Navigator catalogue pages

Out of Stock

Email When In Stock

E3121B: Navigator Minor Led Light - Copper - 12v - Round

Price (ex VAT):

E3121B is a blue l.e.d deck and recessed light which consumes a tiny amount of power and stays cool to the touch. The 0.3w led produces a wide 80 degree beam diffused by the 16mm diameter frosted lens. They are used either to mark out the shape of a deck, patio or terrace, to outline paths and to provide marker lighting in step risers. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led recessed garden lights at about 60cm - 1m apart in step risers, space them about 60cm apart along the centre line of the riser

Colour/Finish:	Natural copper weathers to a mottled brown finish which blends well with red brick and timber, especially darker hardwood decking
IP Rating:	IP67
Construction:	Each light contains long life high-output l.e.d resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking, sleeper walls and other materials using a 28mm wood drill bit. Diameter 40mm (sleeve 32mm; 28mm cutout without sleeve) recess depth 75mm. The top section can be unscrewed to allow insertion of theatrical coloured gels.
Input Voltage:	12v 0.5w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Lamp Type:	0.5w blue l.e.d
Installation:	Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.

Navigator Minor Round Copper deck & recessed light with blue l.e.d.

Download Navigator catalogue pages

In stock (75)

Qty

Buy

E3121W: Navigator Minor - Copper - White Led

Price (ex VAT):

E3121W is a white l.e.d. deck and recessed light which consumes a tiny amount of power and stays cool to the touch. The 0.3w led produces a wide 800 beam diffused by the 16mm diameter frosted lens. They are used either to mark out the shape of a deck, patio or terrace, to outline paths and to provide marker lighting in step risers. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led recessed garden lights at about 60cm - 1m apart in step risers, space them about 60cm apart along the centre line of the riser

Colour/Finish:	Smart 316 grade stainless steel is a popular choice for modern garden settings
IP Rating:	IP67
Construction:	Each light contains long life high-output l.e.d’s resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking sleeper walls and other materials using a 28mm wood drill bit. Diameter 40mm (sleeve 32mm; 28mm cutout without sleeve); recess depth 75mm. The top section can be unscrewed to allow insertion of theatrical coloured gels
Input Voltage:	12v 0.5w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Lamp Type:	0.5w white l.e.d.
Installation:	Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.

Navigator Minor Round Copper deck & recessed light with white l.e.d.

Download Navigator catalogue pages

In stock (20)

Qty

Buy

E3161B: Navigator Minor Led Light - Textured Brass - 12v - Round

Price (ex VAT):

E3161B is a blue l.e.d deck and recessed light which consumes a tiny amount of power and stays cool to the touch. The 0.3w led produces a wide 800 beam diffused by the 16mm diameter frosted lens. They are used either to mark out the shape of a deck, patio or terrace, to outline paths and to provide marker lighting in step risers. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led recessed garden lights at about 60cm - 1m apart in step risers, space them about 60cm apart along the centre line of the riser

Colour/Finish:	Fine sandblasted cast brass finish looks good on decking, timber, sandstone and buff brick
IP Rating:	IP67
Construction:	Each light contains long life high-output l.e.d resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking, sleeper walls and other materials using a 28mm wood drill bit. Diameter 40mm (sleeve 32mm; 28mm cutout without sleeve) recess depth 75mm. The top section can be unscrewed to allow insertion of theatrical coloured gels.
Input Voltage:	12v 12v 0.5w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Lamp Type:	0.5w blue l.e.d
Installation:	Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.

Navigator Minor Round textured brass deck & recessed light with blue l.e.d.

Download Navigator catalogue pages

In stock (42)

Qty

Buy

E3161W: Navigator Minor - Textured brass - White Led

Price (ex VAT):

E3161W is a white l.e.d. deck and recessed light which consumes a tiny amount of power and stays cool to the touch. The 0.3w led produces a wide 800 beam diffused by the 16mm diameter frosted lens. They are used either to mark out the shape of a deck, patio or terrace, to outline paths and to provide marker lighting in step risers. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led recessed garden lights at about 60cm - 1m apart in step risers, space them about 60cm apart along the centre line of the riser

Colour/Finish:	Fine sandblasted cast brass finish looks good on decking, timber, sandstone and buff brick
IP Rating:	IP67
Construction:	Each light contains long life high-output l.e.d’s resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking sleeper walls and other materials using a 28mm wood drill bit. Diameter 40mm (sleeve 32mm; 28mm cutout without sleeve); recess depth 75mm. The top section can be unscrewed to allow insertion of theatrical coloured gels
Input Voltage:	12v 0.5w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Lamp Type:	0.5w white l.e.d.
Installation:	Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.