E3261B is a blue l.e.d light, which consumes a tiny amount of power and stays cool to the touch, adding a stylish modern element to a garden lighting scheme Navigator Major are used either to mark out the shape of a deck, patio or terrace, to outline paths and to light small steps. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led lights at about 0.8 - 1.2 metres apart
||Weatherproof to IP67 - rain & hoseproof
||Each light contains long life high-output l.e.d's resin-encapsulated behind a frosted glass lens in a stainless steel bezel. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking, sleeper walls and other materials using a 38mm wood drill bit
||12v 1w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
||6 blue l.e.d's; blue l.e.d. lights provide a striking garden lighting effect with richly saturated colour for use with stainless steel, glass and water in modern garden lighting schemes
||Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.
||The top section can unscrew to allow the insertion of theatrical coloured gels enable you to customise your garden lighting