E3111WWN is a 12v warm white LED recessed deck light which consumes a tiny amount of power and stays cool to the touch. The 0.3w LED produces a wide beam of light diffused by a 16mm diameter frosted lens. Idea to mark out the shape of a deck, patio or terrace, and to outline paths or provide marker lighting in step risers. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space LED lights at about 60cm - 1m apart.
||High quality 316 grade stainless steel is a popular choice for modern garden settings
||Each light contains long life high-output LED's resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking sleeper walls and other materials using a 28mm wood drill bit. Diameter 40mm (sleeve 32mm; 28mm cutout without sleeve); recess depth 75mm. The top section can be unscrewed to allow insertion of theatrical coloured gels
||12v 0.3w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator LED lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
||0.3w warm white LED
||Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit and for splicing into a run of cable use T9963 cable splice kit.