This is a print preview page, please click here to print

To go back to the website, please click cancel preview

Lighting for Gardens - UK garden and outdoor lighting

Printed from lightingforgardens.com - come back to order online or email your queries to sales@lightingforgardens.com

YOUR ACCOUNT

PRODUCT SELECTION

Type of Light

Installation Materials

Lamps (Bulbs)

Product Accessories

WHAT OUR CUSTOMERS SAY...

"My goods arrived today; my lighting is of very high quality and I am very pleased with your excellent website.

Apart from showing a great range of products it gives good advice and generates confidence in planning garden schemes."

R P, Milton Keynes

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

Navigator Quad small 12v deck & paving light with blue or white l.e.d.'s

Recessed stainless steel square blue led light for modern gardens

The smallest square recessed l.e.d light in the Navigator family of three sizes used to outline a deck or paving or to mark step risers, these miniature 12v recessed deck lights are available with a choice of 2 led colours - white and blue - and a choice of stainless steel, natural copper and fine textured brass finishes. They may be installed in paving or walls during consturction using the plastic sleeve tube supplied, or may be fitted without the sleeve tube in decking ot timber using the integral spring clip

Printer Friendly Page

Select the specific model required by clicking in the drop down boxes below to see full details, price and stock availability.

[Back to top]

E3711B: Navigator Quad Led Light - Stainless Steel - 12v - Square

Price (ex VAT):

E3711B is a blue l.e.d. deck and recessed light which consumes a tiny amount of power and stays cool to the touch. They are used either to mark out the shape of a deck, patio or terrace, to outline paths and to provide marker lighting in step risers in locations where flanking walls, overhead beams or trees from which to light the steps are absent. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led recessed garden lights at about 60cm - 1m apart. In step risers, space l.e.d. lights at about 60cm apart along the centre line of the riser.

Colour/Finish:	Smart 316 grade stainless steel is a popular choice for modern garden settings
IP Rating:	IP67
Construction:	Each light contains long life high-output l.e.d’s resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking sleeper walls and other materials using a 28mm wood drill bit. 40mm x 40mm flange (sleeve 32mm; 28mm cutout without sleeve); recess depth 75mm. The top section can be unscrewed to allow the insertion of theatrical coloured gels
Input Voltage:	12v 0.5w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Lamp Type:	0.5w blue l.e.d.
Installation:	Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.

Navigator Quad square deck & recessed light dimensions

Navigator Quad stainless steel deck & recessed light with blue l.e.d.

Navigator Quad square deck & recessed light specification

Download Navigator catalogue pages

In stock (68)

Qty

Buy

E3711W: Navigator Quad Led Light - Stainless Steel - 12v - Square

Price (ex VAT):

E3711W is a white l.e.d. deck and recessed light which consumes a tiny amount of power and stays cool to the touch. They are used either to mark out the shape of a deck, patio or terrace, to outline paths and to provide marker lighting in step risers in locations where flanking walls, overhead beams or trees from which to light the steps are absent. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led recessed garden lights at about 60cm - 1m apart. In step risers, space l.e.d. lights at about 60cm apart along the centre line of the riser.

Colour/Finish:	316 grade stainless steel is a popular choice for modern garden settings
IP Rating:	IP67
Construction:	Each light contains long life high-output l.e.d’s resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking sleeper walls and other materials using a 28mm wood drill bit. Diameter 40mm (sleeve 32mm; 28mm cutout without sleeve); recess depth 75mm. The top section can be unscrewed to allow the insertion of theatrical coloured gels
Input Voltage:	12v 0.5w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Lamp Type:	0.5w White l.e.d.
Installation:	Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.

Navigator Quad square stainless steel deck & recessed light with white l.e.d.

Download Navigator catalogue pages

In stock (56)

Qty

Buy

E3721B: Navigator Quad Led Light - Copper - 12v - Square

Price (ex VAT):

E3721B is a blue l.e.d. deck and recessed light which consumes a tiny amount of power and stays cool to the touch. They are used either to mark out the shape of a deck, patio or terrace, to outline paths and to provide marker lighting in step risers in locations where flanking walls, overhead beams or trees from which to light the steps are absent. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led recessed garden lights at about 60cm - 1m apart. In step risers, space l.e.d lights at about 60cm apart along the centre line of the riser

Colour/Finish:	Natural copper weathers to a mottled brown finish which blends well with red brick and timber, especially darker hardwood decking
IP Rating:	IP67
Construction:	Each light contains long life high-output l.e.d’s resin encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking sleeper walls and other materials using a 28mm wood drill bit. 40mm x 40mm flange (sleeve 32mm; 28mm cutout without sleeve); recess depth 75mm. The top section can be unscrewed to allow the insertion of theatrical coloured gels
Input Voltage:	12v 0.5w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Lamp Type:	0.3w blue l.e.d.
Installation:	Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.

Navigator Quad square copper deck & recessed light with blue l.e.d.

Download Navigator catalogue pages

In stock (99)

Qty

Buy

E3721W: Navigator Quad Led Light - Copper - 12v - Square

Price (ex VAT):

E3721W is a white l.e.d. deck and recessed light which consumes a tiny amount of power and stays cool to the touch. They are used either to mark out the shape of a deck, patio or terrace, to outline paths and to provide marker lighting in step risers in locations where flanking walls, overhead beams or trees from which to light the steps are absent. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led recessed garden lights at about 60cm - 1m apart. In step risers, space l.e.d lights at about 60cm apart along the centre line of the riser

Colour/Finish:	Natural copper weathers to a mottled brown finish which blends well with red brick and timber, especially darker hardwood decking
IP Rating:	IP67
Construction:	Each light contains long life high-output l.e.d’s resin encapsulated behind a frosted glass lens. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking sleeper walls and other materials using a 28mm wood drill bit. 40mm x 40mm flange (sleeve 32mm 28mm cutout without sleeve); recess depth 75mm. The top section can be unscrewed to allow the insertion of theatrical coloured gels
Input Voltage:	12v 0.5w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Lamp Type:	0.5w whitel.e.d
Installation:	Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.

Navigator Minor Round stainless steel deck & recessed light with blue l.e.d.

Download Navigator catalogue pages

In stock (81)

Qty

Buy

E3761B: Navigator Quad Led Light - Textured Brass - 12v - Square

Price (ex VAT):

E3761B is a blue l.e.d. deck and recessed light which consumes a tiny amount of power and stays cool to the touch. They are used either to mark out the shape of a deck, patio or terrace, to outline paths and to provide marker lighting in step risers in locations where flanking walls, overhead beams or trees from which to light the steps are absent. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led recessed garden lights at about 60cm - 1m apart. In step risers, space l.e.d lights at about 60cm apart along the centre line of the riser

Colour/Finish:	Fine sandblasted cast brass finish looks good on decking, timber sandstone and buff brick
IP Rating:	IP67
Construction:	Each light contains long life high-output l.e.d’s resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking sleeper walls and other materials using a 28mm wood drill bit. 40mm x 40mm flange (sleeve 32mm; 28mm cutout without sleeve); recess depth 75mm. The top section can be unscrewed to allow the insertion of theatrical coloured gels
Input Voltage:	12v 0.5w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Lamp Type:	0.5w blue l.e.d
Installation:	Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.

Navigator Quad square textured brass deck & recessed light with blue l.e.d.

Download Navigator catalogue pages

In stock (100)

Qty

Buy

E3761W: Navigator Quad Led Light - Textured Brass - 12v - Square

Price (ex VAT):

E3761W is a white l.e.d. deck and recessed light which consumes a tiny amount of power and stays cool to the touch. They are used either to mark out the shape of a deck, patio or terrace, to outline paths and to provide marker lighting in step risers in locations where flanking walls, overhead beams or trees from which to light the steps are absent. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space led recessed garden lights at about 60cm - 1m apart. In step risers, space l.e.d lights at about 60cm apart along the centre line of the riser

Colour/Finish:	Fine sandblasted cast brass finish looks good on decking, timber, sandstone and buff brick
IP Rating:	IP67
Construction:	Each light contains long life high-output l.e.d’s resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. They can be recessed without the sleeve in decking sleeper walls and other materials using a 28mm wood drill bit. 40mm x 40mm flange (sleeve 32mm; 28mm cutout without sleeve); recess depth 75mm. The top section can be unscrewed to allow the insertion of theatrical coloured gels
Input Voltage:	12v 0.5w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Lamp Type:	0.5w White l.e.d.
Installation:	Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.