Elipta Arcus 42 Stone Bollard Light - Granite
29 in stock
- Product Overview
- Downloads
- Reviews
The Elipta Arcus 42 Stone Bollard Light 240v (granite) has a built in 6w warm white LED gives you glare free lighting along paths, driveways and around decking and terraces. The Arcus is able to be bolted to paving and slabs or to an optional ground-mount (Elipta Cirrus / Stratus Spike Mount - Square) E1024 which can be installed in concrete prior to electrical installation. An optional ground spike (Elipta Cirrus / Stratus Ground Mount - Square) E1021 is available and can be installed in planting and lawn areas.
| Colour/Finish | Natural Granite |
|---|---|
| Construction | Natural Granite stone cut from a solid block with Built in LED and PSU 240v cable connection via junction box inside fittings |
| IP Rating | IP55 |
| Input Voltage | 240v |
| Light Output | 6w 500 Lumens |
| Installation |
240v cable connection via junction box inside the base of the fitting (DO NOT REMOVE JUNCTION BOX). Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation. Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation |