Elipta Polus Asymmetric LED Recessed Spotlight - 24v-DC-9w 316 Stainless Steel

Elipta Polus Asymmetric LED Recessed Spotlight - 24v-DC-9w 316 Stainless Steel

Product No: EP9945

47 in stock

Low voltage 24v DC Polus Asymmetric outdoor LED recessed light with a warm white, 600 lumen output. IP67 outdoor LED recessed lighting with a built-in LED suitable for wall washing, illuminating statues and at the base of trees - where beam control is a key consideration.
  • Product Overview
  • The Elipta Polus Asymmetric LED Recessed Spotlight is designed for lighting small trees and facades from a close position.  The Polus is a high quality, LED recessed garden lighting fixture with an asymmetric reflector capable of projecting a medium 45° beam upwards to light a tree canopy or facade while still providing coverage at the base. It's also suitable to use as an outside recessed LED light, positioned at the foot of an outside wall, and being particularly effective at guarding against glare and where the control of the light spread is important. An LED power supply is sold separately.

    Colour/Finish: 316 stainless steel 
    IP Rating: IP67
    Construction: Stainless steel top plate is attached to an anodised aluminium body which push fits into the anodised aluminium tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws. 1.5m cable via rear entry cable
    Input Voltage: 24v DC
    Wattage: 9w
    Light Output: 600lm
    Beam Angle: 45°
    Colour Temp: 2700K warm white
    Life Span: Approximately 50,000 hours              
    Installation: The anodised aluminium sleeve is built into the floor/paving during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws. Suitable drainage should be provided below each fitting to prevent water logging. Micro Waymarkers should not be installed in ground subject to water logging. Connect input cable to cable from an LED power supply using T9962 cable joint or T9963 cable splice kit or T9969 underground joint kit.
     
  • Downloads
  • Reviews

Related Products

Elipta Modula Recessed Uplight - Green - Round - 12v MR16
E8741N
£129.60 £108.00
Elipta Adjustable Recessed Walkover Uplight - 240v - GU10 - IP67 - Stainless Steel
EP20GU10
£81.60 £68.00
Elipta Modula Recessed Uplight - Stainless Steel - Round - 240v GU10
E8712N
£133.20 £111.00
Elipta Polus Asymmetric LED Recessed Spotlight - 240v - 9w - 316 Stainless Steel
EP9945MV
£102.00 £85.00
Elipta Vulcan LED Recessed Spotlight - 24v- DC-15w-1380lm-40°-3000K-IP67-Stainless Steel
EP91540
£110.78 £92.32
Elipta Modula Recessed Uplight - Brass - Round - 240v GU10
E8762N
£141.60 £118.00
Elipta Modula Recessed Uplight - Brass - Round - 12v MR16
E8761N
£129.60 £108.00
Elipta Modula Recessed Uplight - Green - Round - 240v GU10
E8742N
£141.60 £118.00