Ensure that the power is OFF during installation and that power cannot be unexpectedly reconnected.
Place the light fitting on a stable surface and with an Allen key remove the U-bracket from the LED
floodlight and store the retaining bolts, split-locks and washers (M6 bolts on 10W/20W and M8 bolts
Present the U-bracket to a suitable position and surface so that it can be mounted flush. Check with a
spirit level if required. Mark out two suitable fixing positions. Use suitable tools and fixings to mount the U-bracket safely and securely to the surface, depending on the substrate; alternative fixings to the items supplied may be required. We recommend using washers to fix the U-bracket. Avoid damage to any wiring. 2 X screws, wall plugs and washers supplied.
Once the U-bracket is mounted, securely reattach the LED floodlight ensuring it is the correct way up
and at the appropriate angle. Ensure bolts are tight on both sides of the U-bracket.
Connect the LED floodlight cable to a suitably protected waterproof junction box.
Please pay attention to the polarity and Earth. The flood light is a CLASS I device – an EARTH connection is MANDATORY.