Infrared driveway beam, master sensor & repeater

Infrared Driveway Beam Master Sensor & Repeater

Product No: LS30820DBS

1 in stock

Infrared driveway beam, master sensor & repeater

Elipta IP65 Junction Box (Plain Sides) - 112 x 112 x 67mm - Black

£4.80

£4.00

Elipta Ground Burial 2 Core Low Voltage Cable - 50m - 2.5mm²

£138.00

£115.00

Elipta Underground Joint Kit c/w Resin Sealant Pack

£22.80

£19.00

Elipta IP68 Cable Gland c/w Lock Nut - 20mm

£0.60

£0.50

Elipta Ground Burial 2 Core Low Voltage Cable - 25m - 4mm²

£86.40

£72.00

Elipta Ground Burial 2 Core Low Voltage Cable - 25m - 1.5mm²

£50.40

£42.00

This Infrared Driveway Beam Master Sensor & Repeater can wirelessly trigger a lighting zone for a set time when a person or vehicle interrupts the beam. This sensor can also be used to switch on a lighting circuit with pre-set brightness level, or trigger a circuit to full brightness for a set period.

Colour/Finish:	Black sender / receiver units, semi-transparent ABS enclosure
Construction:	Tough, black ABS enclosure
IP Rating :	IP66
Input Voltage:	220 - 240v ac 50-60 Hz
Range:	2-10m between sender and receiver - 1000m between control unit and other Lightsymphony devices
Installation:	Connection from the sender and receiver is via thin multi-core cable which is connected to the controller PCB via screw terminal blocks. Main cable termination via glanded cable entry to three way terminal block.