Insika 240v outdoor LED bollard light; warm white LEDs, sleek and modern design with a powder-coated, graphite grey finish. The 324 Lumen light output emits 2 metre glare free radius of light to the front and sides of the fitting, making it an excellent choice for lighting along paths, at intervals of 2-3 metres apart. The bollard may be bolted to paving or decking (anchors supplied) or fixed into wet concrete or soft ground with an optional ground-spike (purchase separately)
|Colour/Finish:||Graphite Grey powder coated aluminium|
|Construction:||Die-cast aluminium with pre-treatment for outdoor use. Built in LED and PSU with a pre wired 2 metre 240v cable for connection in a remote junction box.|
|Light output:||324 Lumens: Approximately the same as a 30w halogen lamp.|
Pre-wired with 2m rubber cable for connection via T9969 underground joint kit.
Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation