|Colour/Finish:||304 grade stainless steel|
|Construction:||Front bezel is attached to tubular aluminium body by three hex screws which sits inside polycarbonate sleeve. 2m cable via rear entry cable|
|Light output||3w 3000k 200lm equivalent to a 20w halogen lamp|
The plastic sleeve is built into the floor during construction: the light pushes into the tube, where it is held firmly in place by 2 screws beneath the stainless steel bezel. Recess depth 120mm. E8512C should not be installed in ground subject to water logging, an IP 68 light such as a 12v Lumilux or Lumimax light should be considered.