Kensington 240v LED outdoor wall light with a unique simplistic design and powder coated, grey finish make it a suitable light for traditional and modern style houses. The E27 lamp holder sits within toughened, clear glass panels and allow the use of 'retro-style' filament LED lamps, saving on energy consumption whilst complimenting traditional design features. Choice of LED filament ES-E27, dimmable LED lamps available
| Colour/Finish: |
Powder coated graphite grey
|
| Construction: |
Die cast aluminium frame with 4 x toughened, clear glass panels
|
| IP Rating : |
IP54
|
| Input Voltage: |
240v
|
| Light output: |
15w
|
| Installation: |
There are 2 cable glands in the bottom of the fitting which accept up to 10mm diameter cable. One cable gland is blanked off. By removing the blanking plug you can wire in a daisy chain.
Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation
|
