Elipta Vortex Bollard Light - Warm White - Graphite
Out of stock
- Product Overview
- More Information
- Downloads
- Reviews
The Elipta Vortex Bollard Light 240v with warm white LEDs has a sleek design with a modern powder coated graphite grey finish and a useful 7 watt 262 Lumen light output with a 2 metre glare free radius of light to the front and sides of the fitting making it a great addition for lighting along paths at intervals of 2-4 metres apart.
The Vortex may be bolted to paving and slabs or with ‘wet’ concrete fixings before electrical installation. An optional ground spike is available for planting and lawn areas.
| Colour/Finish: |
Graphite Grey powder coated aluminium |
|---|---|
| Construction: |
Die-cast aluminium with pre-treatment for outdoor use. Built in LED and PSU with a pre-wired 2 metre 240v cable for connection in a remote junction box. |
| Input Voltage: | 240v |
| Light Output: | 262 Lumens : Approximately the same as a 30w halogen lamp |
| Installation: |
Pre-wired with 2m rubber cable for connection via T9969 underground joint kit: There is no space inside the fitting for internal connections. Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation |
| Finish | Graphite |
|---|