The Elipta Phanzi 240v Outdoor Wall Light Square (stainless steel) recessed steplight gives you a glare free light onto steps, patios and paths with flanking walls. With its 64° beam angle and mounted 500mm above the ground the fitting gives you a 2 metre radius of useful light, perfect for lighting most paths and steps. The garden light is located by two spring clips on the body into the sleeve tube so that no external screw fixings are visible.
|Colour/Finish:||Modern 304 brushed Stainless Steel|
|Construction:||304 grade stainless steel front, die-cast aluminium body. Built in LED and PSU with a pre wired 2 metre 240v cable for connection in a remote junction box.|
|Light output:||54 Lumens|
|Installation:||The plastic sleeve is built into the wall during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by spring clips, leaving a front plate with no visible fixing screws. Recess depth 81mm. Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation|