Titan26 LED Spotlight - 240v - 26w Warm White

Titan26 LED Spotlight - 240v - 26w Warm White

Product No: E9826WW60

48 in stock

Titan26 LED Spotlight - 240v - 26w Warm White - 60 degree beam angle

  • Elipta IP65 Junction Box (Plain Sides) - 112 x 112 x 67mm - Black
    £4.80
    £4.00

    Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm - Black
    £9.00
    £7.50

    Elipta Copper Grease Sachet 30cc
    £1.44
    £1.20

    Elipta Underground Joint Kit c/w Resin Sealant Pack
    £22.80
    £19.00

    Elipta IP68 Cable Gland c/w Lock Nut - 20mm
    £0.60
    £0.50

    Elipta MPGEL Re-Enterable Clear Sealant 1 Litre Bottle
    £50.40
    £42.00

    Elipta Burial Resin Sealant Pack 350ml
    £18.00
    £15.00

  • Product Overview

    • Titan26 is an adjustable spike-mount 240v led spotlight with an aluminium body and glare shield powder-coated in black. It has a high-efficiency COB led in a wide 60 degree beam for uplighting trees and focal points. 240v Spike spotlights need their own circuit from an existing or new fuse box. The box must be protected by a residual current device (RCD) and controlled with a double-pole isolating switch. As a general rule of thumb, the armoured cables need to be run underground- at least 600mm with waterproof junction boxes. Use an electrician qualified under 'Part P' building regulations to install any mains electricity outdoors who will certify the work properly.

    Colour/Finish: Black-powder coated aluminium body with glare shield and mounting spike
    IP Rating: IP65
    Input Voltage: 240v
    Light Output: 2272Lm - 3000K Warm White
    Colour Temp: 2700K
    Beam Angle 60°              
    Installation:
    Stirrup bracket mounts on walls or the ground spike supplied. A 2m 3
    core 1mm H05RN-F input cable is provided for connection to the
    mains supply via a separate weatherproof junction box or
    underground joint kit (not supplied).
    Using a single RCD for large numbers of 240v fittings is not
    recommended due to the risk of nuisance tripping. We advise the
    use of separate RCD protection for each circuit and a maximum
    of 12 fittings per RCD.
     
     
  • Downloads
  • Reviews