Elipta Atlantus With Glare Shield, Spike Mount & Extended Stem - Brass

Elipta Atlantus With Glare Shield, Spike Mount & Extended Stem - Brass

Product No: R3606PX

Out of stock

Atlantus Underwater Light with Glare Shield, Spike & Stem - 12v - Textured Brass
  • Elipta 6w 480lm MR16 COB LED Lamp - Warm white 2700K 60°
    £22.80
    £19.00

    Elipta 7w 630lm MR16 COB Lamp - Warm white 2700K 15° Dimmable
    £22.80
    £19.00

    Elipta 7w 630lm MR16 COB Lamp - Warm white 2700K 30° Dimmable
    £14.40
    £12.00

    Elipta 7w 630lm MR16 COB Lamp - Warm White 2700K 60° Dimmable
    £22.80
    £19.00

    Elipta MR16 Lamp 250lm 2700K Warm White 60°
    £9.00
    £7.50

    Elipta MR16 Lamp 250lm 2700K Warm White 36°
    £9.00
    £7.50

  • Elipta 20w - 12v dc - Potted LED Power Supply in IP65 Enclosure
    £64.80
    £54.00

    Elipta 60w - 12v dc - Potted LED Power Supply in IP65 Enclosure
    £80.40
    £67.00

    Elipta Surface-Mount Exterior Transformer - 12v ac - 20va
    £30.00
    £25.00

    Elipta Surface-Mount Exterior Transformer - 12v ac - 40va
    £32.40
    £27.00

    Elipta Surface-Mount Exterior Transformer - 12v ac - 60va
    £39.00
    £32.50

    Elipta 6 Way IP68 Round Junction Box c/w M16 Cable Glands
    £18.60
    £15.50

    Elipta 3 Pole IP68 In-Line Cable Connector
    £12.36
    £10.30

    Elipta 3 Pole IP68 In-Line Cable Connector 'Y' Split
    £9.60
    £8.00

    Elipta 10w - 12v Dc - IP67 Potted LED Power Supply In IP65 Enclosure
    £22.80
    £19.00

  • Product Overview
  •  
    12v Atlantus underwater lights with glare shield, spike and stem in Textured brass are designed for submersion in water features. They take lamps from 20w to 50w in a variety of beam angles to cater for a wide range of creative garden lighting effects. LED lamps can be fitted as long life, low energy alternatives. Underwater lighting will create a shimmering lighting effect if used in conjunction with moving water, and movement in lighting effects adds another dimension to creative garden lighting design. A frosted lens can be substituted for the standard clear lens for diffused lighting. Clip-on colour filters, glare louvre and effects lenses may be fitted to the front of MR16 lamps inside the light for a variety of lighting effects.
     
    Colour/Finish: Textured brass
    IP Rating: IP68
    Construction: Pressure die-cast brass body with brass stirrup bracket. Heat resistant, flush tempered clear glass. Pre-wired with 6 metres of double insulated 1.5mm HO&-RNF cable via a brass cable gland and high temperature ''O'' ring seal. Lens bezel & "U" bracket secured by stainless steel screws with allen key heads.
    Input Voltage: 12 volts - requires power from a remote transformer
    Lamp Type: MR16 12v tungsten halogen reflector lamp or MR16 led lamps (Order lamp separately) Use 50w underwater only; 35w maximum out of water. Use 10w or 20w lamp maximum or an led lamp for recessed in walkover surfaces to avoid hot lens
    Installation: Direct connection to a transformer or junction box via 6 metre cable fitted. Avoid cable joints underwater or in wet areas unless the joint is resin filled.
    Accessories:

    MR16 clip-on honeycomb glare filter

    MR16 clip-on colour filters and frosted lens

     
     
  • Reviews

Related Products

Elipta Hydro Plus Underwater Light With Base
E996SS
£147.60 £123.00
Elipta Micro Underwater Light 2w 3000K Stainless Steel 24v DC 200LM
ERU010-01A
£78.00 £65.00
Elipta Lunar Underwater Spotlight
GLMR16S
£28.20 £23.50