Elipta Atlantus With Glare Shield, Spike Mount & Extended Stem - Brass

 

12v Atlantus underwater lights with glare shield, spike and stem in Textured brass are designed for submersion in water features. They take lamps from 20w to 50w in a variety of beam angles to cater for a wide range of creative garden lighting effects. LED lamps can be fitted as long life, low energy alternatives. Underwater lighting will create a shimmering lighting effect if used in conjunction with moving water, and movement in lighting effects adds another dimension to creative garden lighting design. A frosted lens can be substituted for the standard clear lens for diffused lighting. Clip-on colour filters, glare louvre and effects lenses may be fitted to the front of MR16 lamps inside the light for a variety of lighting effects.

 

Colour/Finish:	Textured brass
IP Rating:	IP68
Construction:	Pressure die-cast brass body with brass stirrup bracket. Heat resistant, flush tempered clear glass. Pre-wired with 6 metres of double insulated 1.5mm HO&-RNF cable via a brass cable gland and high temperature ''O'' ring seal. Lens bezel & "U" bracket secured by stainless steel screws with allen key heads.
Input Voltage:	12 volts - requires power from a remote transformer
Lamp Type:	MR16 12v tungsten halogen reflector lamp or MR16 led lamps (Order lamp separately) Use 50w underwater only; 35w maximum out of water. Use 10w or 20w lamp maximum or an led lamp for recessed in walkover surfaces to avoid hot lens
Installation:	Direct connection to a transformer or junction box via 6 metre cable fitted. Avoid cable joints underwater or in wet areas unless the joint is resin filled.
Accessories:	MR16 clip-on honeycomb glare filter MR16 clip-on colour filters and frosted lens