COVID-19 Update: We continue to trade as normal - If you wish to click & collect then please get in touch.
Ex. VAT
Inc. VAT
Titan10 is an adjustable spike-mount 240v led outdoor spotlight with an aluminium body and glare shield powder-coated in black. It has a high-efficiency 10w COB led providing light output equivalent to a 75w halogen lamp in a focused 36 degree beam for uplighting trees and focal points. Built-in CREE LED 60,000 hours.
240v Spike spotlights need their own circuit from an existing or new fuse box. The box must be protected by a residual current device (RCD) and controlled with a double-pole isolating switch. As a general rule of thumb, the armoured cables need to be run underground- at least 450mm with weatherproof junction boxes. Use an electrician qualified under 'Part P' building regulations to install any mains electricity outdoors who will certify the work properly.
|
IP rating |
IP65 |
|
Construction |
Black-powder coated aluminium body with glare shield and mounting spike |
|
Input |
240v |
|
Light source |
Integral Bridgelux 10w warm white 3000K COB led |
|
Light output |
750 lumens (Equivalent to 75w halogen lamp) Non dimmable |
|
Beam angle |
36 degrees |
|
Installation |
Stirrup bracket mounts on walls or the ground spike supplied. A 2m input cable is provided for connection to the mains supply via a separate weatherproof junction box or underground joint kit (not supplied). Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. |
