The Elipta Navigator Minor (stainless steel) is a 12v warm white LED recessed deck light which consumes a tiny amount of power and keeps cool to the touch. The 0.3w LED creates a wide beam of light diffused by a 16mm diameter frosted lens. We recommend to mark out the shape of a deck, patio or terrace, and to outline paths or provide marker lighting in step risers. To outline a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space LED lights at about 60cm - 1m apart. We recommend using a 12v constant voltage power supply but you can use a 12v wire-wound transformer.
|Colour/Finish:||High quality 316 grade stainless steel is a popular choice for modern garden settings|
|Construction:||Each light contains long life high-output LED's resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. Comes supplied with 1m H05RN two core cable. They can be recessed without the sleeve in decking sleeper walls and other materials using a 28mm wood drill bit. Diameter 40mm (sleeve 32mm; 28mm cutout without sleeve); recess depth 75mm. The top section can be unscrewed to allow insertion of theatrical coloured gels|
|Input Voltage:||12v 0.3w: NAVIGATORS should be connected to 1.5mm or 2.5mm ground burial low voltage cable with a heat-shrink crimped-connector weatherproof Joint Kit - T9962 Cable Joint Kit (for connecting to the end of a cable) or T9963 Cable Splice Kit (for connecting into a run of cable). NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator LED lights. If powering from a 12v 20va or 50va ac wire-wound transformer, ensure transformer is loaded to at least 60% of nominal rating.|
|Lamp Type:||0.3w warm white LED|
|Installation:||Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit and for splicing into a run of cable use T9963 cable splice kit.|