Elipta 20w - 12v dc - Potted LED Power Supply in IP65 Enclosure

Elipta 20w - 12v dc - Potted LED Power Supply in IP65 Enclosure

Product No: T9208ENC

20 in stock

20w - 12v dc - Potted LED Power Supply In IP65 Enclosure

Elipta Transformer Mounting Stakes (Pair)

£16.20

£13.50

Elipta Ground Burial 2 Core Low Voltage Cable - 50m - 2.5mm²

£138.00

£115.00

Elipta Ground Burial 2 Core Low Voltage Cable - 25m - 2.5mm²

£69.60

£58.00

Elipta Cable Joint Kit

£1.92

£1.60

Elipta Cable Splice Kit

£4.32

£3.60

Elipta IP68 Cable Gland c/w Lock Nut - 20mm

£0.60

£0.50

Elipta Ground Burial 2 Core Low Voltage Cable - 50m - 1.5mm²

£99.60

£83.00

Elipta Ground Burial 2 Core Low Voltage Cable - 25m - 1.5mm²

£50.40

£42.00

Elipta Burial Resin Sealant Pack 350ml

£18.00

£15.00

Elipta 6 Way IP68 Round Junction Box c/w M16 Cable Glands

£18.60

£15.50

The T9208ENC Elipta 20w - 12v DC - potted LED power supply in IP65 enclosure is mounted into a black polycarbonate box, for mounting on a wall or post hidden behind planting and landscape features, under decking or in outbuildings, T9599 Elipta Transformer Mounting Stakes are optional.

Colour/Finish:	Black
Dimensions:	L 160mm W 120mm D 71mm
IP Rating:	IP67
Construction:	potted power supply mounted into a black polycarbonate box
Input Voltage:	240v input
Watts:	20 watts. Will power a maximum of 40 Navigator Minor , 20 Navigator Major or 10 Navigator Maxor/Navigator Eye fittings
Installation:	For surface mounting: Using a slotted screwdriver, rotate each of the 4 quarter-turn corner fixings 90 degrees to the "0" position and remove the lid to reveal the fixing slots in each corner. Secure the transformer to a wall or post with 5mm screws in each corner, or attach to optional transformer mounting stakes. Install the transformer on a wall or post approx. 30cm above ground.