Elipta Smoothie Eyelid Light - Stainless Steel - 240v

In stock

SKU

E8112

Be the first to review this product

Stylish 240v recessed light with eyelid for lighting steps or patios with a wide choice of GU10 LED lamps

£104.40

Select Lamp (Bulb)

0 Option Selected

Elipta 13w Fluorescent Spotlamp - 240v GU10 - Warm White

£6.00

Elipta 6w 550lm GU10 COB LED Lamp - Warm White 2700k 30° Dimmable

£19.20

Elipta 6w 550lm GU10 COB LED Lamp - Warm White 2700k 60° Dimmable

£19.20

Elipta 3w 260lm GU10 COB Lamp - Warm White 2700K 60°

£10.80

Elipta GU10 RGB + CCT 4w Lamp

£22.80

Elipta GU10 LED Lamp - 3.6w Warm White - 240v

£7.20

Elipta 5.6w - 400lm - Warm White Gu10 LED 36° 2700K Dimmable

£6.00

Select Extras

0 Options Selected

Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm - Black

£7.20

Elipta IP66 Junction Box c/w Terminals / Entries - 110 x 110 x 65mm - Black

£10.80

Elipta Copper Grease Sachet 30cc

£1.44

Elipta Underground Joint Kit c/w Resin Sealant Pack

£22.80

Elipta IP68 Cable Gland c/w Lock Nut - 20mm

£0.60

Elipta MPGEL Re-enterable Clear Sealant 1 litre Bottle

£50.40

Elipta Burial Resin Sealant Pack 350ml

£18.00

Elipta 6 Way IP68 Round Junction Box c/w M16 Cable Glands

£18.60

Elipta Shark Gel Insulated Joint 6A

£11.40

Elipta Shark Gel Insulated Joint 13A

£23.76

Elipta 3 Pole IP68 In-Line Cable Connector

£9.60

Elipta 3 Pole IP68 In-Line Cable Connector 'Y' Split

£9.60

Price

£104.40

QUANTITY

ORDER IN THE NEXT 5HRS 10MINS FOR FREE NEXT DAY DELIVERY

For delivery on 11/08/2020, order in the next

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Colour/Finish:	316 grade stainless steel
IP Rating:	IP65
Construction:	Front bezel with eyelid is attached to tubular aluminium body which unscrews into 2 halves without tools for easy lamp changing. 2m cable via rear entry cable
Input Voltage:	240v
Lamp Type:	GU10 3w or 5w led lamps; . Order lamps separately
Installation:	The plastic sleeve is built into the wall during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws. Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation
Accessories:	Clip-on Colour Filters & Lenses

Colour/Finish:

316 grade stainless steel

IP Rating:

IP65

Construction:

Front bezel with eyelid is attached to tubular aluminium body which unscrews into 2 halves without tools for easy lamp changing. 2m cable via rear entry cable

Input Voltage:

240v

Lamp Type:

GU10 3w or 5w led lamps; . Order lamps separately

Installation:

The plastic sleeve is built into the wall during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws.

Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation

Accessories:

Clip-on Colour Filters & Lenses