The Greenwich 240v bollard light has a nautical style, made from solid natural brass to withstand coastal conditions. The lamp is enclosed in a sturdy ribbed glass dome providing a full 360° spread of light. It accepts E27 LED. The polished brass un-lacquered finish can be allowed to weather naturally or it can be cleaned with brass polish.
|Construction||Pressure Die cast top and base fitted to a solid brass pole|
|Lamp Type||E27 240v LED lamps. (Order lamps separately)|
Pre-wired with 2m rubber cable for connection via T9969 underground joint kit: the installer may shorten the fitted cable to make a weatherproof connection inside the base of the light using a gasketed 65mm conduit box or similar weatherproof junction box.
Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 240v lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation