Elipta Manzi Outdoor Wall Light - Warm White - Round - Stainless Steel

Elipta Manzi Outdoor Wall Light - Warm White - Round - Stainless Steel

Product No: EH2771-LED

42 in stock

Manzi Round Recessed steplight - 240v - Warm White LED - Stainless Steel
  • Elipta IP65 Junction Box (Plain Sides) - 112 x 112 x 67mm - Black
    £4.80
    £4.00

    Elipta IP65 Junction Box (Plain Sides) - 160 x 120 x 71mm - Black
    £8.40
    £7.00

    Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm - Black
    £9.00
    £7.50

    Elipta IP66 Junction Box c/w Terminals / Entries - 110 x 110 x 65mm - Black
    £15.60
    £13.00

    Elipta Underground Joint Kit c/w Resin Sealant Pack
    £22.80
    £19.00

    Elipta IP68 Cable Gland c/w Lock Nut - 20mm
    £0.60
    £0.50

    Elipta MPGEL Re-Enterable Clear Sealant 1 Litre Bottle
    £50.40
    £42.00

    Elipta Burial Resin Sealant Pack 350ml
    £18.00
    £15.00

    Elipta 6 Way IP68 Round Junction Box c/w M16 Cable Glands
    £18.60
    £15.50

    Elipta HO7RN-F 3 Core Cable - 25m-1mm²
    £33.60
    £28.00

    Elipta HO7RN-F 3 Core Cable - 100m - 1mm²
    £132.00
    £110.00

  • Product Overview
  • The Elipta Manzi 240v Outdoor Wall Light Round (stainless steel) recessed steplight gives you a glare free light onto steps, patios and paths with flanking walls. With its 64° beam angle and mounted 500mm above the ground the fitting gives you a 2 metre radius of useful light, perfect for lighting most paths and steps. The garden light is placed by two spring clips on the body into the sleeve tube so that no external screw fixings are visible.

    Colour/Finish: Modern 304 brushed Stainless Steel
    IP Rating: IP65
    Construction: 304 grade stainless steel front, die-cast aluminium body. Built in LED and PSU with a pre wired 2 metre 240v cable for connection in a remote junction box
    Input Voltage: 240v
    Light output:

    54 lumens : 3000K. 

    Wattage :

    3 watts

    Installation: The plastic sleeve is built into the wall during construction or retrofitted into a hole cut with a coring bit the light pushes into the tube, where it is held firmly in place by spring clips, leaving a front plate with no visible fixing screws. Recess depth 81mm. Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation.

     

  • More Information
  • Finish Stainless steel
  • Downloads
  • Reviews