Elipta Navigator Maxor - Copper - 12v - White LED - Round

Elipta Navigator Maxor - Copper - 12v - White LED - Round

Product No: E3321W

52 in stock

Navigator Maxor is a low energy, high output LED deck and recessed light which consumes a small amount of power and stays cool to the touch.
  • Elipta Ground Burial Transformer - 12v ac - 50va
    £48.00
    £40.00

    Elipta 20w - 12v dc - Potted LED Power Supply in IP65 Enclosure
    £64.80
    £54.00

    Elipta 35w - 12v dc - Potted LED Power Supply in IP65 Enclosure
    £66.00
    £55.00

    Elipta Surface-Mount Exterior Transformer - 12v ac - 20va
    £30.00
    £25.00

    Elipta Surface-Mount Exterior Transformer - 12v ac - 40va
    £32.40
    £27.00

    Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm - Black
    £9.00
    £7.50

    Elipta Cable Joint Kit
    £1.92
    £1.60

    Elipta Cable Splice Kit
    £4.32
    £3.60

    Elipta Underground Joint Kit c/w Resin Sealant Pack
    £22.80
    £19.00

    Elipta IP68 Cable Gland c/w Lock Nut - 20mm
    £0.60
    £0.50

    Elipta MPGEL Re-Enterable Clear Sealant 1 Litre Bottle
    £50.40
    £42.00

    Elipta Ground Burial 2 Core Low Voltage Cable - 25m - 1.5mm²
    £50.40
    £42.00

    Elipta Surface-Mount Exterior Transformer - 12v ac - 10va
    £26.40
    £22.00

    Elipta 6 Way IP68 Round Junction Box c/w M16 Cable Glands
    £18.60
    £15.50

    Elipta IP68 LED Power Supply - 12v dc - 15w
    £33.60
    £28.00

    Elipta 3 Pole IP68 In-Line Cable Connector
    £12.36
    £10.30

    Elipta 3 Pole IP68 In-Line Cable Connector 'Y' Split
    £9.60
    £8.00

    Elipta 10w - 12v Dc - IP67 Potted LED Power Supply In IP65 Enclosure
    £22.80
    £19.00

    Elipta 10w - 12v Dc - IP67 Potted LED Power Supply In Ground Burial Enclosure
    £40.80
    £34.00

    Elipta 10w - 12v dc - IP67 Potted LED Power Supply
    £16.80
    £14.00

  • Product Overview
  • The Elipta Navigator Maxor (copper) 12v is a low energy, high output white LED deck and recessed light which uses a small amount of power and stays cool to the touch. The high output 1.5w white LED produces a wide 100° beam diffused by the 28mm diameter frosted lens. The natural copper will weather to a nutty brown colour with some verdigris patina after a few months.The Navigator Maxor is used either to mark out the shape of a deck, patio and terrace or to outline paths and to light steps. To outline a deck or patio space with a unique shape, begin at the corners of the decking or paving and place LED recessed garden lights at about 1 - 1.5m apart.

    Colour/Finish: Natural copper weathers to a mottled brown finish which blends well with red brick and timber, especially darker hardwood decking
    IP Rating: IP65
    Lamp Type: 1w 4000K LED
    Lumens: 123lm
    Construction: Long life high-output l.e.d. resin-encapsulated behind a frosted glass lens. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls.  Comes supplied with 1m H05RN two core cable. They can be recessed without the sleeve in decking sleeper walls and other materials using a 44mm hole saw. Diameter 60mm (sleeve 48mm; 44mm cutout without sleeve); recess depth 75mm.
    Input Voltage: 12v 1.5w: NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator LED lights. If powering from a 12v ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
    Installation: Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.
    Accessories: The top section can be unscrewed to allow the insertion of theatrical coloured gels to enable you to customise your garden lighting system.
  • More Information
  • Finish Copper
  • Downloads
  • Reviews