Elipta Navigator Mono - Copper - 12v - Warm White LED - Round
Out of stock
- Product Overview
The Elipta Navigator Mono (copper) 12v is a warm white LED deck and recessed light which consumes a tiny amount of power (0.5w) and stays cool to the touch, adding a stylish modern element to a garden lighting scheme. The Navigator Mono is used to mark out the shape of a deck, patio or terrace, to outline paths and light small steps. Start at the corners of the decking or paving and space lights about 0.8 - 1.2 metres apart to outline a deck or patio space with a distinctive shape. Use a 12v constant voltage power supply or 12v wire-wound transformer.
|Natural copper weathers to a mottled brown finish which blends well with red brick and timber, especially darker hardwood decking
|Weatherproof to IP65 - rain & hoseproof
|0.5w 3000K warm white LED
|Each light contains long life high-output LED resin-encapsulated behind a frosted glass lens in a stainless steel bezel. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. Comes supplied with 1m H05RN two core cable. They can be recessed without the sleeve in decking, sleeper walls and other materials using a 38mm wood drill bit
|12v 0.5w: NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator LED lights. If powering from a 12v ac wire-wound transformer, ensure transformer is loaded to at least 60% of nominal rating.
|Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit.
|The top section can be unscrewed to allow the insertion of theatrical coloured gels to enable you to customise your garden lighting