🎄Merry Christmas and a Happy New Year to all of our customers!🎄

We will be closed from Friday 22nd December 2023 and will re-open Tuesday 2nd January 2024.

Any orders placed after midday Wed 20th Dec will be dispatched Tuesday 2nd January 2024.

Elipta Nimbus 70 Bollard Light with Louvres - Teak

Elipta Nimbus 70 Bollard Light with Louvres - Teak

Product No: E1072TL

Out of stock

Low energy bollard light in natural teak with horiziontal louvres for lighting paths, drives and terraces
  • Elipta 7w LED Candle Lamp 2700K 650lm - Non-dimmable 240v

    Elipta 5.9w LED Candle Lamp 470lm 2700K 240v Non-dimmable

    Elipta 4.9w LED Candle lamp - 240v E27 2700K 470lm

  • Elipta Nimbus Ground Mount - Round

    Elipta Nimbus Spike Mount - Round

    Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm - Black

    Elipta IP66 Junction Box c/w Terminals / Entries - 110 x 110 x 65mm - Black

    Elipta Copper Grease Sachet 30cc

    Elipta Underground Joint Kit c/w Resin Sealant Pack

    Elipta IP68 Cable Gland c/w Lock Nut - 20mm

    Elipta MPGEL Re-Enterable Clear Sealant 1 Litre Bottle

    Elipta Burial Resin Sealant Pack 350ml

    Elipta 6 Way IP68 Round Junction Box c/w M16 Cable Glands

  • Product Overview
  • The Elipta Nimbus 70 Bollard Light with Louvres (teak) use timber from a sustainable source, organically oiled in production to enhance and protect the grain. The bollards are manufactured from a natural raw material which reacts to temperature changes and will naturally release sap or may sweat inside protective packaging. Once installed, they will weather naturally in the garden, although further oil, stain or varnish treatments can be applied by the user.

    Teak bollard lights may be bolted to paving and slabs or to an optional ground-mount which can be installed in concrete prior to electrical installation. An optional galvanised ground spike is obtainable for instalation in planting and lawn areas. The diffuser is made of polycarbonate, and each metal parts is 316 grade stainless steel. For security purposes, the Nimbus features concealed allen screw fixngs for the top cap assembly. Elipta wooden bollard lights are 70cm or 45cm high and available with 7 watts LED Candle lamp for outdoor areas including driveways, at the side of garden paths, decking and terraces. (Order lamps separately).

    Colour/Finish: Natural Teak from a sustainable source
    IP Rating: IP44
    Construction: Teak body and cap: 316 grade stainless steel metal parts: polycarbonate diffuser.
    Input Voltage: 240 v
    Lamp Type: 7 watts LED Candle lamp. Order lamps separately

    Pre-wired with 2m rubber cable for connection via T9969 underground joint kit: the installer may shorten the fitted cable to make a weatherproof connection inside the base of the light using a T9966 3 pole IP68 in-line Cable connector.

    Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation

  • Downloads
  • Reviews

Related Products

Elipta Cirrus 45 Bollard Light - Teak
£210.00 £175.00
Elipta Nimbus 70 Bollard Light - Teak
£258.00 £215.00
Elipta Nimbus 45 Bollard Light with Louvres - Teak
£230.40 £192.00