2 Channel Starter Kit: Handset - Wall Switch - 2 Channel Controller

2 Channel Starter Kit: Handset - Wall Switch - 2 Channel Controller

Product No: LS3SKIT2

1 in stock

Starter Kit comprises one 2 Channel 2KW Lighting Control Unit, one 9 channel remote control handset and one wireless wall switch
  • Product Overview
  • The Light Symphony Starter Kit comprises one 2 Channel 2KW Lighting Control Unit, one handset and one wall switch. Each channel is fully rated for an inductive load for remote control of fluorescent outdoor lighting, low voltage garden lighting or metal halide exterior lighting without de-rating.

    The RF remote handset provides complete and simple control over an entire lighting scheme with a 1000 metre "line-of-sight" walk-about range. It is simple to use, and its splash-proof, easy clean, brushed aluminium effect keypad lends itself to outdoor life. Any number of handsets can be used together. 16 ''system-codes'' are selectable to avoid interference with neighbouring systems. The handset employs the very latest narrow-band FM radio technology to achieve a best-in-class wireless range while achieving superb rejection to interference. The handset is also a commissioning tool, providing ''lid-on'' programming of other Light Symphony components

    The wireless wall switch provides the convenience of a standard wall switch without the mess of installation. The switch is supplied with a standard white 2 gang switch and 20mm deep white surface-box but can be refitted to alternative switch plates to provide up 4 remote control circuits. The standard white switch plate can be fitted directly to the wall or flush mounted using a regular 25mm back-box. Space permitting, the internal module can be removed from the supplied switch-plate and re-fitted behind an existing switch or one of choice to match the décor. The internal module provides 1000 metre line-of-site range. Each switch can be programmed to control the whole garden or a selected Area. The module can learn the programming wirelessly from the remote control (lid-on setup) or can be configured manually using the internal push-button.

    The Lighting Control Unit provides 2 wirelessly controllable outputs each rated at 1000W and suitable for all load types. It provides flexible control for any lighting circuit or pump and is quickly configurable as a simple switch, group (zone) or scene controller, with 9 memories and a master on/off. Output 1 can be programmed as a switched or dimmable output. Output 2 is switched only. The dimming mode provides a soft-on, soft-off feature with filament pre-heating, which can greatly increases lamp life.The separately fused outputs are fully protected against over current and over temperature. Large 10mm? cable terminations, standard (20mm) gland cut-outs and an earth bonded gland-chassis simplify installation.The built-in signal-strength indicator, zero-volt mains switching and power-on surge protection all enhance reliability. Lid-on programming speeds commissioning and reduces the risk of water ingress during installation.

    The switch unit comprises a 2 gang surface mount white switch & box containing an rf transmitter capable of controlling up to 4 circuits. The rf module can be rehoused in any surface or recessed 2-4 channel switch plate.
    How to use it Using the master ''garden on/off'' feature, all Lighting Control Module (LCM) outputs can be switched together. It also provides 9 individual ''Area'' buttons, which can be used in different ways, depending on the size of the project;SMALL : Individual control of 1- 9 lighting circuits, as shown above.MEDIUM : Control of up to 9 ''Areas'', where individual LCM output''s are grouped together to create lighting ''zones''.LARGE : Scene control. Up to 9 complete lighting ''moods'' may be stored and recalled

    The Lighting Control Module (LCM) ''hears'' the wireless commands from any of Light Symphony''s 1000 metre controllers, such as the remote control or wireless wall-switch pictured above. The Garden On/Off button will switch all outputs together, providing a convenient master control. Each output can also be separately assigned to ''Area'' keys (1-9), to provide individual control.An internal switch enables dimming (on output 1) and the soft on / soft off feature. For larger systems, limitless LCM''s may be used together to create flexible lighting zones or scenes. If a base-station is installed, it will also hear commands from the remote control or wall-switch and echo them. The Lighting Control Modules will ''hear'' both signals, significantly increasing the range and reliability.
    Range: 1000 metre wireless range line-of-site
    Enclosure: IP44 (splash-proof), wipe clean Grey ABS, colour RAL7011
    Size: 135x70x25mm
    RF: 434.075MHz Narrow Band FM.
    Coding: Security channels 1-16.
    Power: 2x AA batteries (for clock backup)
    CE Compliance: EN220300, EN500811 To EN500821
     
     
  • More Information
  • Channels 2 Channel starter kit
    Type Lighting Controllers
  • Downloads
  • Reviews

Related Products

Wireless PIR Motion Detector
LS30070PIR
£126.00 £105.00
Wireless Wall Switch
LS30061WSM
£93.60 £78.00
9 Channel Remote Control Handset
LS30050WRC
£126.00 £105.00
LightSymphony Key Fob - 4 Zones
LS30034FOB
£84.00 £70.00
4-Channel 4X 500W Lighting Controller
LS30540RGBW
£298.80 £249.00
Single Channel Lighting Controller
LS30505SCC
£122.40 £102.00
2-Channel 2kW Lighting Controller
LS30500LCM
£190.80 £159.00
LightSymphony Key Fob - 2 Zones
LS30032FOB
£84.00 £70.00