The Light Symphony 2 x 2 Channel Handset Starter Kit comprises two 2 Channel 2KW Lighting Control Unit, one handset and one wall switch. Each channel is fully rated for an inductive load for remote control of fluorescent outdoor lighting, low voltage garden lighting or metal halide exterior lighting without de-rating. The two controllers can be installed in different locations and powered from different sources, making it ideal for systems where two distinct areas are to be controlled: an example would be use of one controller for the rear garden and one for the front garden, controlled from one handset and one wall switch.
The RF remote handset provides complete and simple control over an entire lighting scheme with a 1000 metre "line-of-sight" walk-about range. It is simple to use, and its splash-proof, easy clean, brushed aluminium effect keypad lends itself to outdoor life. Any number of handsets can be used together. 16 ''system-codes'' are selectable to avoid interference with neighbouring systems. The handset employs the very latest narrow-band FM radio technology to achieve a best-in-class wireless range while achieving superb rejection to interference. The handset is also a commissioning tool, providing ''lid-on'' programming of other Light Symphony components
The Lighting Control Unit provides 2 wirelessly controllable outputs each rated at 1000W and suitable for all load types. It provides flexible control for any lighting circuit or pump and is quickly configurable as a simple switch, group (zone) or scene controller, with 9 memories and a master on/off. Output 1 can be programmed as a switched or dimmable output. Output 2 is switched only. The dimming mode provides a soft-on, soft-off feature with filament pre-heating, which can greatly increases lamp life.The separately fused outputs are fully protected against over current and over temperature. Large 10mm? cable terminations, standard (20mm) gland cut-outs and an earth bonded gland-chassis simplify installation.The built-in signal-strength indicator, zero-volt mains switching and power-on surge protection all enhance reliability. Lid-on programming speeds commissioning and reduces the risk of water ingress during installation.
The switch unit comprises a 2 gang surface mount white switch & box containing an rf transmitter capable of controlling up to 4 circuits. The rf module can be rehoused in any surface or recessed 2-4 channel switch plate.
|How to use it
||Using the master ''garden on/off'' feature, all Lighting Control Module (LCM) outputs can be switched together. It also provides 9 individual ''Area'' buttons, which can be used in different ways, depending on the size of the project;SMALL : Individual control of 1- 9 lighting circuits, as shown above.MEDIUM : Control of up to 9 ''Areas'', where individual LCM output''s are grouped together to create lighting ''zones''.LARGE : Scene control. Up to 9 complete lighting ''moods'' may be stored and recalled
The Lighting Control Unit (LCM) ''hears'' the wireless commands from any of Light Symphony''s 1000 metre controllers, such as the remote control or wireless wall-switch pictured above. The Garden On/Off button will switch all outputs together, providing a convenient master control. Each output can also be separately assigned to ''Area'' keys (1-9), to provide individual control.An internal switch enables dimming (on output 1) and the soft on / soft off feature. For larger systems, limitless LCM''s may be used together to create flexible lighting zones or scenes. If a base-station is installed, it will also hear commands from the remote control or wall-switch and echo them. The Lighting Control Modules will ''hear'' both signals, significantly increasing the range and reliability.
||1000 metre wireless range line-of-site
||IP44 (splash-proof), wipe clean Grey ABS, colour RAL7011
||434.075MHz Narrow Band FM.
||Security channels 1-16.
||2x AA batteries (for clock backup)
||EN220300, EN500811 To EN500821