The Light Symphony 4 channel Handset Starter Kit comprises one 4 Channel Lighting Control Unit, one 9 channel handset and one wall switch. Each channel is fully rated for an inductive load for remote control of fluorescent outdoor lighting, low voltage garden lighting or metal halide exterior lighting without de-rating.
The wireless wall switch provides the convenience of a standard wall switch without the mess of installation. The switch is supplied with a standard white 2 gang switch and 20mm deep white surface-box but can be refitted to alternative switch plates to provide up 4 remote control circuits. The standard white switch plate can be fitted directly to the wall or flush mounted using a regular 25mm back-box. Space permitting, the internal module can be removed from the supplied switch-plate and re-fitted behind an existing switch or one of choice to match the décor. The internal module provides 1000 metre line-of-site range. Each switch can be programmed to control the whole garden or a selected Area. The module can learn the programming wirelessly from the remote control (lid-on setup) or can be configured manually using the internal push-button.
The RF remote handset provides complete and simple control over an entire lighting scheme with a 1000 metre "line-of-sight" walk-about range. It is simple to use, and its splash-proof, easy clean, brushed aluminium effect keypad lends itself to outdoor life. Any number of handsets can be used together. 16 ''system-codes'' are selectable to avoid interference with neighbouring systems. The handset employs the very latest narrow-band FM radio technology to achieve a best-in-class wireless range while achieving superb rejection to interference. The handset is also a commissioning tool, providing ''lid-on'' programming of other Light Symphony components
This Lighting Control Module (LCM) provides 4 wirelessly controllable outputs each rated at up to 1000W and suitable for all load types. It provides flexible control for any lighting circuit or pump and is quickly configurable as a simple switch, group (zone) or scene controller, with 29 zone memories for individual circuits or zones and a master on/off.Outputs 1 and 2 can be programmed as a switched or dimmable output. Outputs 3 and 4 are not dimmable by default: user dimming can be enabled if the total load is under 500w per channel (2kw) total. The dimming mode provides a soft-on, soft-off feature with filament pre-heating, which can greatly increases lamp life.The separately fused outputs are fully protected against over current and over temperature. Large 10mm? cable terminations, standard (20mm) gland cut-outs and an earth bonded gland-chassis simplify installation.The built-in signal-strength indicator, zero-volt mains switching and power-on surge protection all enhance reliability. Lid-on programming speeds commissioning and reduces the risk of water ingress during installation.
|How to use it
||The Lighting Control Module (LCM) ''hears'' the wireless commands from any of Light Symphony''s 1000meter controllers, such as the remote control or wireless wall-switch pictured above. The Garden On/Off button will switch all outputs together, providing a convenient master control. Each output can also be separately assigned to one of 29 memories for switching individual circuits or creating wireless zones, to provide individual control.For larger systems, limitless LCM''s may be used together to create flexible lighting zones or scenes.If a base-station is installed, it will also hear commands from the remote control or wall-switch and echo them. The Lighting Control Modules will ''hear'' both signals, significantly increasing the range and reliability.
||1000 metre wireless range line-of-site
||IP66, UV stable, ABS plastic with non-penetrating wall-mounts translucent lid & neoprene o-ring. Colour RAL7011
||225 x 185 x 85mm
||434.075MHz Narrow Band FM.
||Security channels 1-16.
||Supply: 230VAC +/-10% 50Hz Standby <1W
||EN220300, EN500811 To EN500821