Unibeam is an adjustable spike-mount 240v LED outdoor spotlight with a telescopic glare shield, for focusing the beam angle range from 10° up to 60° making the light very versatile. Stylish and modern exterior lighting for a wide range of subjects including large wide-spreading shrubs, to more focused outdoor lighting on objects like statues. It has a high-efficiency, built-in 12w COB LED providing light output equivalent to a 75w halogen lamp with a multi-focused beam. Unibeam represents cutting edge design in outdoor LED lighting; an outside LED spotlight with a 550 lumen output and a class leading 10°-60° warm white, adjustable beam angle.
240v Spike spotlights need their own circuit from an existing or new fuse box. The box must be protected by a residual current device (RCD) and controlled with a double-pole isolating switch. As a general rule of thumb, the armoured cables need to be run underground- at least 450mm with weatherproof junction boxes. Use an electrician qualified under 'Part P' building regulations to install any mains electricity outdoors who will certify the work properly.
|Colour/Finish:||Anthracite anodised aluminium|
|Construction:||Tubular anodised heatsinked aluminium body with anodised stirrup bracket and adjustable telescopic glareshield|
|Beam Angle:||10°- 60°|
|Life Span:||Approximately 50,000 hours|
Stirrup bracket mounts on walls or the ground spike supplied. A 2m input cable is provided for connection to the mains supply via a separate weatherproof junction box or underground joint kit (not supplied).
Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD.