Patilo RGB + CCT LED Floodlight 30w 240v
Product No: PRGBCCTF30
12 in stock
PRGB + CCT LED Floodlight 30w 240V
£89.99
- Product Overview
- Downloads
- Reviews
PRGB + CCT LED Floodlight 30w 240V with its compact size and slimline design makes it a neat unobtrusive fitting for wall washing and floodlighting trees from 3m to 6m in height. The PRGBCCTF30 can be controlled by the PRGBCCT092 - Touchzone PRGB + CCT Remote (Supplied seperately) or by your Smart phone when you purchase the PRGBIBOX2 - Wifi iBox Controller. The Touchzone remote and PRGBIBOX2 allows you a full range of colour changing and operation of pre programed colour displays. You can also select from a range of white colour temperatures to give you your preferred white and allows dimming of both white and colour functions.
| Colour/Finish: | Powder coated aluminium |
|---|---|
| Construction: | Aluminium construction with a black powder coat finish and a clear acrylic diffuser |
| IP Rating: | IP44 |
| Input Voltage: | 240v |
| Lamp Type: | 240v E27 LED |
| Installation: | Stirrup bracket mounts on walls or the optional E2530M ground spike. Alternatively, the E4013BN can be used for mounting on a tree. A 400mm input cable is provided for connection to the mains supply via a separate weatherproof junction box, junction box or underground joint kit (not supplied). Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD To connect the PRGBCCT092 controller power off then power on. Within 3 seconds touch the 'zone-On' buttons quickly 3 times. Once the LED flashes green set up is complete. To un-link repeat this process but press 'Zone-On' 5 times. The lights will now flash red. |