We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Elipta Titan26 LED Spotlight - 240v - 26w Warm White

Ex. VAT
Inc. VAT
Titan26 is a powerful, adjustable spike-mount 240v LED spotlight, ideal for uplighting trees. The high-efficiency 26w COB LED produces a focused beam of warm white light and the built in glare shield can be rotated and locked into position for optimum glare protection. It can also be used as a downlighter for wall or tree mounting. Built-in CREE LED 60,000 hours.
240v Spike spotlights need their own circuit from an existing or new fuse box. The box must be protected by a residual current device (RCD) and controlled with a double-pole isolating switch. As a general rule of thumb, the armoured cables need to be run underground- at least 450mm with weatherproof junction boxes. Use an electrician qualified under 'Part P' building regulations to install any mains electricity outdoors who will certify the work properly.
IP rating |
IP65 |
Construction |
Black-powder coated aluminium body with glare shield and mounting spike |
Input |
240v |
Light source |
Integral Bridgelux 26w warm white 3000K COB led |
Light output |
2272 lumens (Equivalent to 200w halogen lamp) Non dimmable |
Beam angle |
36 degrees |
Installation |
Stirrup bracket mounts on walls or the ground spike supplied. A 2m input cable is provided for connection to the mains supply via a separate weatherproof junction box or underground joint kit (not supplied). Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. |