• Home
  • Elipta Unibeam Telescopic Garden Spike Light c/w spike - 240v - 12w -550lm-10°-60°-2700K-IP67- Anodised Anthracite
Go back

Order in hours ?? minutes ?? seconds to receive items that are in-stock on Tuesday 10th December.

Elipta Unibeam Telescopic Garden Spike Light c/w spike - 240v - 12w -550lm-10°-60°-2700K-IP67- Anodised Anthracite

EP41260Z: 
Unibeam telescopic garden spike spotlight with built-in 12w COB LED 240v. An IP67 rated LED outdoor spotlight, anodised aluminium construction with an anodised Anthracite finish
Print this page
£77.24 (exc vat) £92.69 (inc vat)

Sign up for price alert

DELIVERY DUE MID JANUARY

Unibeam is an adjustable spike-mount 240v LED outdoor spotlight with a telescopic glare shield, for focusing the beam angle range from 10° up to 60° making the light very versatile. Stylish and modern exterior lighting for a wide range of subjects including large wide-spreading shrubs, to more focused outdoor lighting on objects like statues. It has a high-efficiency, built-in 12w COB LED providing light output equivalent to a 75w halogen lamp with a multi-focused beam. Unibeam represents cutting edge design in outdoor LED lighting; an outside LED spotlight with a 550 lumen output and a class leading 10°-60° warm white, adjustable beam angle.

240v Spike spotlights need their own circuit from an existing or new fuse box. The box must be protected by a residual current device (RCD) and controlled with a double-pole isolating switch. As a general rule of thumb, the armoured cables need to be run underground- at least 450mm with weatherproof junction boxes. Use an electrician qualified under 'Part P' building regulations to install any mains electricity outdoors who will certify the work properly.

Colour/Finish: Anthracite anodised aluminium
IP Rating: IP67
Construction: Tubular anodised heatsinked aluminium body with anodised stirrup bracket and adjustable telescopic glareshield
Input Voltage: 240v
Wattage: 12w
Light Output: 550lm
Beam Angle: 10°- 60°
Colour Temp: 2700K
Life Span: Approximately 50,000 hours              
Installation:

Stirrup bracket mounts on walls or the ground spike supplied. A 2m input cable is provided for connection to the mains supply via a separate weatherproof junction box or underground joint kit (not supplied).

Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD.
 
 
 
 
Unibeam Spike - 240v      Warranty
 
 


Related Products

Accessories

Sorry we don't have any accessories for this product

Cancel/Close

Installation materials for this product

Please wait
Elipta 3 Pole IP68 In-Line Cable Connector 'Y' Split

Elipta 3 Pole IP68 In-Line Cable Connector 'Y' Split

£8.00 (exc vat) £9.60 (inc vat)
BUY NOW
Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm - Black

Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm - Black

£6.00 (exc vat) £7.20 (inc vat)
BUY NOW
Elipta 3 Pole IP68 In-Line Cable Connector

Elipta 3 Pole IP68 In-Line Cable Connector

£8.00 (exc vat) £9.60 (inc vat)
BUY NOW
Elipta IP65 Junction Box (Plain Sides) - 112 x 112 x 67mm - Black

Elipta IP65 Junction Box (Plain Sides) - 112 x 112 x 67mm - Black

£4.00 (exc vat) £4.80 (inc vat)
BUY NOW

This selection shows the most commonly used installation materials for this product: for additional options please visit the installation materials section to finalise your shopping basket

I'm finished choosing my options
Cancel/Close

Lamps suitable for this product

Please wait

This selection shows the most commonly used lamps for this product: for additional options please visit the lamps section to finalise your shopping basket

I'm finished choosing my options