Elipta Vela Steplight - 12v - Bronze Finished Brass Body

Elipta Vela Steplight - 12v - Bronze Finished Brass Body

Product No: PG3R

221 in stock

Surface mount bronze finished brass eyelid steplight for lighting steps and patio areas
  • Elipta 2w LED Capsule Lamp - 12v G4 2700K 200lm
    £6.60
    £5.50

    Elipta 3w LED Capsule Lamp - 12v G4 2700K 300lm
    £12.00
    £10.00

    Elipta 4w LED Capsule Lamp - 12v G4 2700K 400lm
    £14.40
    £12.00

  • Elipta Plug & Play Transformer 105va
    £64.50
    £53.75

    Elipta Plug & Play Transformer 12va
    £24.60
    £20.50

    Elipta Plug & Play Transformer 20va
    £27.60
    £23.00

    Elipta Plug & Play Transformer 60va
    £42.00
    £35.00

    Elipta Plug & Play Transformer 6va
    £22.20
    £18.50

    Elipta Plug&Play 3 Way Cable Connector
    £4.50
    £3.75

    Elipta Plug&Play 5 Way Cable Connector
    £6.60
    £5.50

    Elipta Plug&Play IP44 Extension Cable 10m
    £28.20
    £23.50

    Elipta Plug&Play IP44 Extension Cable 2m
    £10.68
    £8.90

    Elipta Plug&Play IP44 Extension Cable 5m
    £16.56
    £13.80

    Elipta Plug & Play Waterproof Cable Connector
    £6.00
    £5.00

    Elipta Plug & Play IP68 Junction Box
    £22.80
    £19.00

  • Product Overview
  • The Elipta Vela Steplight (bronze finished brass body) is a compact 12 volt surface mount garden light perfect for lighting steps or around terraces or deck areas where recessing a light is impractical and glare protection is important. The bronze finish is particularly suitable for use with timber, stone and brick construction where a rustic appearance is preferred. The Vela may be used with a G4 LED 2w, 3w or 4w capsule lamp. This garden light is fitted with a 1.5m cable with IP44 plug & play connector for easy installation with plug & play transformers and accessories.

    Colour/Finish: Bronze finish brass body
    IP Rating: IP65
    Input: 12v volts - requires power from a remote transformer
    Lamp Type: CAPDISC3WW lamp, or CAPLED led lamp - Order lamps separately
    Installation: 1.5m of 2 core cable with male IP44 2-pin input connector to plug into a Plug&Play transformer.
     
     
  • Downloads