Go back

Order in hours ?? minutes ?? seconds to receive items that are in-stock on Thursday 27th February.

Elipta Polus Asymmetric LED Recessed Spotlight - 240v - 9w - 316 Stainless Steel

EP9945MV

Mains voltage 240v  Polus Asymmetric outdoor LED recessed light with a warm white, 600 lumen output. IP67 outdoor LED recessed lighting with a built-in LED suitable for wall washing, illuminating statues and at the base of trees - where beam control is a key consideration.

£85.00 (exc vat) £102.00 (inc vat)
New Product - Awaiting Delivery Date

The Elipta Polus Asymmetric outdoor LED spotlights are designed for lighting small trees and facades from a close position.  The Polus is a high quality, LED recessed lighting fixture with an asymmetric reflector capable of projecting a medium 45° beam upwards to light a tree canopy or facade while still providing coverage at the base. Also suitable to use as an outside recessed LED light, positioned at the foot of an outside wall, and being particularly effective at guarding against glare and where the control of the light spread is important. Purchase transformer separately.

Colour/Finish: 316 stainless steel 
IP Rating: IP67
Construction: 316 grade Stainless steel top plate is attached to tubular aluminium body which push fits into the aluminium tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws. 1.5m cable via rear entry cable.
Input Voltage: 240v
Wattage: 9w
Light Output: 600lm
Beam Angle: 45°
Colour Temp: 2700K warm white
Life Span: Approximately 50,000 hours              
Installation: The plastic sleeve is built in during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an o-ring.

Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation
 
 
 
 
 
 
 


Accessories

Sorry we don't have any accessories for this product

Cancel/Close

Installation materials for this product

Underground Joint Kit c/w Resin Sealant Pack

Underground Joint Kit c/w Resin Sealant Pack

£19.00 (exc vat) £22.80 (inc vat)
BUY NOW
Elipta IP65 Junction Box (Plain Sides) - 112 x 112 x 67mm  -  Black

Elipta IP65 Junction Box (Plain Sides) - 112 x 112 x 67mm - Black

£4.00 (exc vat) £4.80 (inc vat)
BUY NOW
Elipta Burial Resin Sealant Pack 350ml

Elipta Burial Resin Sealant Pack 350ml

£15.00 (exc vat) £18.00 (inc vat)
BUY NOW
Elipta IP68 Cable Gland c/w Lock Nut - 20mm

Elipta IP68 Cable Gland c/w Lock Nut - 20mm

£0.50 (exc vat) £0.60 (inc vat)
BUY NOW
Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm  -  Black

Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm - Black

£6.00 (exc vat) £7.20 (inc vat)
BUY NOW
Elipta HO7RN-F 3 Core Cable - 25m-1mm²

Elipta HO7RN-F 3 Core Cable - 25m-1mm²

£28.00 (exc vat) £33.60 (inc vat)
BUY NOW
Elipta MPGEL Re-enterable Clear Sealant 1 litre Bottle

Elipta MPGEL Re-enterable Clear Sealant 1 litre Bottle

£42.00 (exc vat) £50.40 (inc vat)
BUY NOW

This selection shows the most commonly used installation materials for this product: for additional options please visit the installation materials section to finalise your shopping basket

I'm finished choosing my options
Cancel/Close

Lamps suitable for this product

This selection shows the most commonly used lamps for this product: for additional options please visit the lamps section to finalise your shopping basket

I'm finished choosing my options