|Colour/Finish:||Stainless Steel finish blends well with modern materials and timber|
|Construction:||Front bezel is attached to tubular aluminium body. 2m cable via rear entry cable gland|
|Lamp Type:||240v GU10 halogen, long-life energy-saving compact fluorescent and 3w or 5w l.e.d. lamps; 50,000 life and low energy consumption make these a popular option. l.e.d. and fluorescent lamps also result in a much lower lens temperature, which is important in walkover areas.|
The plastic sleeve is built in during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an o-ring.
Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation