🎄Merry Christmas and a Happy New Year to all of our customers!🎄

We will be closed from Friday 22nd December 2023 and will re-open Tuesday 2nd January 2024.

Any orders placed after midday Wed 20th Dec will be dispatched Tuesday 2nd January 2024.

Elipta Polus Asymmetric LED Recessed Spotlight - 240v - 9w - 316 Stainless Steel

Elipta Polus Asymmetric LED Recessed Spotlight - 240v - 9w - 316 Stainless Steel

Product No: EP9945MV

102 in stock

Mains voltage 240v  Polus Asymmetric outdoor LED recessed light with a warm white, 600 lumen output. IP67 outdoor LED recessed lighting with a built-in LED suitable for wall washing, illuminating statues and at the base of trees - where beam control is a key consideration.
  • Product Overview
  • The Elipta Polus Asymetric LED Recessed Spotlight-240v (stainless steel) is designed for up-lighting tasks where you need to angle the light. The Polus is a high quality, LED recessed lighting fixture with an asymmetric reflector capable of projecting a medium beam of light upwards with a 45° tilt, suitable for uplighting walls, statues and small trees. It can light a tree canopy or facade while still providing coverage at the base. This beautifully made light is surprisingly powerful for such a small fitting, and its small footprint makes it suitable as a deck light or for use in paving.

    Colour/Finish: 316 stainless steel 
    IP Rating: IP67
    Construction: 316 grade Stainless steel top plate is attached to tubular aluminium body which push fits into the aluminium tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws. 1.5m cable via rear entry cable.
    Input Voltage: 240v
    Wattage: 9w
    Light Output: 600lm
    Beam Angle: 45°
    Colour Temp: 2700K warm white
    Life Span: Approximately 50,000 hours              
    Installation:

    The aluminium sleeve is built in during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an o-ring.

    Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation.

  • Downloads
  • Reviews

Related Products

Elipta Modula Recessed Uplight - Brass - Round - 12v MR16
E8761N
£129.60 £108.00
Elipta Adjustable Recessed Walkover Uplight - 12v - MR16 - IP67 - Stainless Steel
EP20MR16
£76.80 £64.00
Elipta Modula Recessed Uplight - Green - Round - 240v GU10
E8742N
£141.60 £118.00
Elipta Adjustable Recessed Walkover Uplight - 240v - GU10 - IP67 - Stainless Steel
EP20GU10
£81.60 £68.00

Out of stock

Elipta Modula Recessed Uplight - Green - Round - 12v MR16
E8741N
£129.60 £108.00
Elipta Vulcan LED Recessed Spotlight - 24v- DC-15w-1380lm-40°-3000K-IP67-Stainless Steel
EP91540
£110.78 £92.32
Elipta Modula Recessed Uplight - Stainless Steel - Round - 240v GU10
E8712N
£133.20 £111.00
Elipta Vulcan LED Recessed Spotlight - 24v- DC-15w-1380lm-60°-3000K-IP67-Stainless Steel
EP91560
£110.78 £92.32