Elipta Nimbus 45 Bollard Light - Teak

Elipta Nimbus 45 Bollard Light - Teak

Product No: E1042T

27 in stock

Nimbus 45 teak bollard light with polycarbonate diffuser
  • Elipta 7w LED Candle Lamp 2700K 650lm - Non-dimmable 240v
    £19.80
    £16.50

    Elipta 5.9w LED Candle Lamp 470lm 2700K 240v Non-dimmable
    £14.40
    £12.00

    Elipta 4.9w LED Candle lamp - 240v E27 2700K 470lm
    £3.00
    £2.50

  • Elipta Nimbus Ground Mount - Round
    £13.20
    £11.00

    Elipta Nimbus Spike Mount - Round
    £24.60
    £20.50

    Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm - Black
    £7.20
    £6.00

    Elipta IP66 Junction Box c/w Terminals / Entries - 110 x 110 x 65mm - Black
    £10.80
    £9.00

    Elipta Copper Grease Sachet 30cc
    £1.44
    £1.20

    Elipta Underground Joint Kit c/w Resin Sealant Pack
    £22.80
    £19.00

    Elipta IP68 Cable Gland c/w Lock Nut - 20mm
    £0.60
    £0.50

    Elipta MPGEL Re-Enterable Clear Sealant 1 Litre Bottle
    £50.40
    £42.00

    Elipta Burial Resin Sealant Pack 350ml
    £18.00
    £15.00

    Elipta 6 Way IP68 Round Junction Box c/w M16 Cable Glands
    £18.60
    £15.50

  • Product Overview
  • Elipta Teak bollard lights use timber from a sustainable source, organically oiled during production to enhance and protect the grain. The bollards are made from a natural raw material which reacts to temperature changes and will naturally release sap or may sweat inside protective packaging. Once installed, they will weather naturally in the garden, although further oil, stain or varnish treatments may be applied by the user. Teak bollard lights may be bolted to paving and slabs or to an optional ground-mount which can be installed in concrete prior to electrical installation. An optional galvanised ground spike is available for installation in planting and lawn areas. The diffuser is made of polycarbonate and all metal parts are 316 grade stainless steel.

    For added security, the Nimbus features concealed allen screw fixngs for the top cap assembly: Elipta wooden bollard lights are 45cm high and available with 7 watts LED Candle lamp for driveways, around garden paths, decking and terraces. (Order lamps separately).

    Colour/Finish: Natural Teak from a sustainable source
    IP Rating: IP44
    Construction: Teak body and cap: 316 grade stainless steel metal parts: polycarbonate diffuser.
    Input Voltage: 240 v
    Lamp Type: 7watt LED Candle lamp. Order lamps separately
    Installation:

    Pre-wired with 2m rubber cable for connection via T9969 underground joint kit: the installer may shorten the fitted cable to make a weatherproof connection inside the base of the light using a T9966 3 pole IP68 in-line Cable connector.

    Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation

     
     
     
  • More Information
  • Brand Elipta
  • Downloads

Related Products

Elipta Cirrus 45 Bollard Light - Teak
E1142T
£210.00 £175.00
Elipta Nimbus 70 Bollard Light with Louvres - Teak
E1072TL
£264.00 £220.00
Elipta Nimbus 45 Bollard Light with Louvres - Teak
E1042TL
£230.40 £192.00