Go back

Order in hours ?? minutes ?? seconds to receive items that are in-stock on Tuesday 21st January.

Spike12 Garden Spotlight - 240v - 12w - 1250lm - 40° - 2700K - IP67 - Anodised Anthracite

EP41240MV

Spike12 garden spotlight low voltage 240v - 12w -1250lm-40°-2700K. IP67 outdoor LED spotlight constructed from diecast aluminium with an anodised anthracite finish.

£63.70 (exc vat) £76.44 (inc vat)
New Product - Due Mid January 2020

The Elipta Spike12 LED spike spotlight has a modern yet discrete anodised finish make it a suitable fitting for both modern and traditional garden settings.  Extra glare protection is available with the use of the EPGS65 glare shield.  By removing the spike from the fitting, it can be mounted onto a pergola and used for spotlighting down on a subject.
240v Spike spotlights need their own circuit from an existing or new fuse box. The box must be protected by a residual current device (RCD) and controlled with a double-pole isolating switch. As a general rule of thumb, the armoured cables need to be run underground- at least 450mm with weatherproof junction boxes. Use an electrician qualified under 'Part P' building regulations to install any mains electricity outdoors who will certify the work properly.

Colour/Finish: Anodised Anthracite
IP Rating: IP67
Construction: Diecast aluminium with anodised anthracite finish
Input Voltage: 240v
Wattage: 12w
Light Output: 1250lm
Beam Angle: 40°
Colour Temp: 2700K
Life Span: Approximately 50,000 hours              
Installation:
Stirrup bracket mounts on walls or the ground spike supplied. A 2m input cable is provided for connection to the mains supply via a separate weatherproof junction box or underground joint kit (not supplied).
 
Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD.
 
 
 
 

   
 
 


Accessories

Sorry we don't have any accessories for this product

Cancel/Close

Installation materials for this product

Elipta IP68 Cable Gland c/w Lock Nut - 20mm

Elipta IP68 Cable Gland c/w Lock Nut - 20mm

£0.50 (exc vat) £0.60 (inc vat)
BUY NOW
Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm  -  Black

Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm - Black

£6.00 (exc vat) £7.20 (inc vat)
BUY NOW
Elipta HO7RN-F 3 Core Cable - 25m-1mm²

Elipta HO7RN-F 3 Core Cable - 25m-1mm²

£28.00 (exc vat) £33.60 (inc vat)
BUY NOW
Elipta MPGEL Re-enterable Clear Sealant 1 litre Bottle

Elipta MPGEL Re-enterable Clear Sealant 1 litre Bottle

£42.00 (exc vat) £50.40 (inc vat)
BUY NOW
Underground Joint Kit c/w Resin Sealant Pack

Underground Joint Kit c/w Resin Sealant Pack

£19.00 (exc vat) £22.80 (inc vat)
BUY NOW
Elipta IP65 Junction Box (Plain Sides) - 112 x 112 x 67mm  -  Black

Elipta IP65 Junction Box (Plain Sides) - 112 x 112 x 67mm - Black

£4.00 (exc vat) £4.80 (inc vat)
BUY NOW
Elipta Burial Resin Sealant Pack 350ml

Elipta Burial Resin Sealant Pack 350ml

£15.00 (exc vat) £18.00 (inc vat)
BUY NOW

This selection shows the most commonly used installation materials for this product: for additional options please visit the installation materials section to finalise your shopping basket

I'm finished choosing my options
Cancel/Close

Lamps suitable for this product

This selection shows the most commonly used lamps for this product: for additional options please visit the lamps section to finalise your shopping basket

I'm finished choosing my options