Elipta Adjustable Recessed Walkover Uplight - 12v - MR16 - IP67 - Stainless Steel
109 in stock
- Product Overview
- More Information
- Downloads
- Reviews
The Elipta Adjustable Recessed Walkover Uplight has a 316 stainless steel top ring, IP67 anodised aluminium body and a flush, frosted lens. It can be fitted with a choice of 12v MR16 LEDs - (order separately). The cool lens temperature makes it ideal as a walkover light and the adjustable lampholder bracket provides up to 20° of movement from vertical for directional lighting. The light is located by an ‘O’ ring on the body into an anodised aluminium recessed sleeve tube. It is supplied with 3M of 2 core HO5RN-F cable. To facilitate removal of screws for future re-lamping or other maintenance, apply copper grease to the threads of all screws being fitted for retention of bezels, grills or other top plates or retaining rings. Copper grease resists degradation due to heat and protects against difficulty in removing screws, particularly where stainless steel screws are fitted with aluminium parts. It may also be used on screw threads of screw-off bezels or glare shields.
| Colour/Finish: | Stainless Steel |
|---|---|
| IP Rating: | IP67 |
| Construction: | The metal sleeve is built in during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an ‘o’-ring. |
| Input Voltage: | 12v |
| Beam Angle: | Lamp holder adjustable 30° from vertical |
| Installation: | The metal sleeve is built in during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an o-ring. Connect input cable to cable from transformer using T9962 cable joint or T9963 cable splice kit. |
| Finish | Stainless steel |
|---|