We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.

Ex. VAT
Inc. VAT
The Matrix 240v bollard light has a built in 5w warm white LED in the top of the fitting to give you unique 1.6m diameter of glare free lighting along paths, driveways and around decking and terraces. The bollard may be bolted to paving or decking (anchors supplied) or fixed into wet concrete or soft ground with an optional ground-spike (purchase separately)
Colour/Finish: | Graphite grey powder coated aluminium |
---|---|
IP Rating: | IP54 |
Construction: | Die-cast aluminium with pre-treatment for outdoor use. Built in LED and PSU with a pre wired 2 metre 240v cable for connection in a remote junction box. |
Input Voltage: | 240v |
Light output: |
356 Lumens: |
Pre-wired with 2m rubber cable for connection via T9969 underground joint kit: the installer may shorten the fitted cable to make a weatherproof connection inside the base of the light using a gasketed 65mm conduit box or similar weatherproof junction box.
Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation