Elipta Senatrix is a beautifully made modern bollard light in a graphite grey textured finish.
Equally at home in contemporary designs or in amongst planting it has a single, downward facing, warm white LED, focused by a convex glass lens to create a unique, clearly defines circle of light.
The downward facing LED provides a 1-6 metre diameter spread of light without the glare you often get with bollard lights. In addition to the 1-6 metre circle of light there is also a much wider spread of soft ambient light.
The Senatrix is ideal for lighting along paths, driveways and around decking and terraces. An optional ground spike is available for installation in planting and lawn areas
|Colour/Finish:||Graphite grey powder coated aluminium|
|Construction:||Die-cast aluminium with pre-treatment for outdoor use. Built in LED and PSU with a pre wired 2 metre 240v cable for connection in a remote junction box.|
|Installation:||Pre-wired with 2m rubber cable for connection via T9969 underground joint kit: the installer may shorten the fitted cable to make a weatherproof connection inside the base of the light using a gasketed 65mm conduit box or similar weatherproof junction box.
Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation