Elipta Cirrus 45 Bollard Light - Teak

Elipta Cirrus 45 Bollard Light - Teak

Product No: E1142T

74 in stock

Low energy bollard light in natural teak with polycarbonate diffuser for lighting paths, drives and terraces

  • Elipta 4.9w LED Candle lamp - 240v E27 2700K 470lm
    £3.00
    £2.50

  • Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm - Black
    £9.00
    £7.50

    Elipta Copper Grease Sachet 30cc
    £1.44
    £1.20

    Elipta IP68 Cable Gland c/w Lock Nut - 20mm
    £0.60
    £0.50

    Elipta Burial Resin Sealant Pack 350ml
    £18.00
    £15.00

    Elipta IP66 Junction Box c/w Terminals / Entries - 110 x 110 x 65mm - Black
    £15.60
    £13.00

    Elipta MPGEL Re-Enterable Clear Sealant 1 Litre Bottle
    £50.40
    £42.00

    Elipta Underground Joint Kit c/w Resin Sealant Pack
    £22.80
    £19.00

    Elipta Cirrus / Stratus Spike Mount - Square
    £24.60
    £20.50

    Elipta Cirrus / Stratus Ground Mount - Square
    £13.20
    £11.00

  • Product Overview
    •   
    Elipta Teak bollard lights use timber from a sustainable source, organically oiled during production to enhance and protect the grain. The bollards are made from a natural raw material which reacts to temperature changes and will naturally release sap or may sweat inside protective packaging.
    Once installed, they will weather naturally in the garden, although further oil, stain or varnish treatments may be applied by the user.
    Teak bollard lights may be bolted to paving and slabs or to an optional ground-mount which can be installed in concrete prior to electrical installation. An optional galvanised ground spike is available for installation in planting and lawn areas. The diffuser is made of polycarbonate and all metal parts are 316 grade stainless steel.
    For added security, the Cirrus features concealed allen screw fixngs for the top cap assembly.
    Elipta wooden bollard lights are 45cm high and available with 7 watts LED Candle lamp for driveways, around garden paths, decking and terraces.
    (Order lamps separately).
     
    Colour/Finish: Natural Teak from a sustainable source
    IP Rating: IP44
    Construction: Teak body and cap: 316 grade stainless steel metal parts: polycarbonate diffuser.
    Input Voltage: 240 v
    Lamp Type: 7 watts LED Candle lamp. Order lamps separately
    Installation:

    Pre-wired with 2m rubber cable for connection via T9969 underground joint kit: the installer may shorten the fitted cable to make a weatherproof connection inside the base of the light using a T9966 3 pole IP68 in-line Cable connector.

    Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation

  • More Information
    • Finish Teak
    product_type_custom Outdoor Lighting > Path, Step & Deck Lighting > Garden Bollard Lights
    Voltage 240v
    Lamp 240v Candle Lamp
    IP Rating IP44
    RGB Colour Changing No
  • Downloads
  • Reviews

Related Products

Elipta Nimbus 70 Bollard Light with Louvres - Teak
Elipta Nimbus 70 Bollard Light with Louvres - Teak
E1072TL
£264.00 £220.00
View Product
Elipta Cirrus 45 Bollard Light with Louvres - Teak
Elipta Cirrus 45 Bollard Light with Louvres - Teak
E1142TL
£108.00 £90.00 £216.00 £180.00
View Product
Elipta Nimbus 45 Bollard Light with Louvres - Teak
Elipta Nimbus 45 Bollard Light with Louvres - Teak
E1042TL
£230.40 £192.00
View Product
Elipta Nimbus 45 Bollard Light - Teak
Elipta Nimbus 45 Bollard Light - Teak
E1042T
£174.00 £145.00 £222.00 £185.00
View Product