Elipta Polus Asymmetric LED Recessed Spotlight - 24v-DC-9w 316 Stainless Steel
42 in stock
- Product Overview
- More Information
- Downloads
- Reviews
The Elipta Polus Asymmetric LED Recessed Spotlight is designed for lighting small trees and facades from a close position. The Polus is a high quality, LED recessed garden lighting fixture with an asymmetric reflector capable of projecting a medium 45° beam upwards to light a tree canopy or facade while still providing coverage at the base. It's also suitable to use as an outside recessed LED light, positioned at the foot of an outside wall, and being particularly effective at guarding against glare and where the control of the light spread is important. An LED power supply is sold separately.
| Colour/Finish: | 316 stainless steel |
|---|---|
| IP Rating: | IP67 |
| Construction: | Stainless steel top plate is attached to an anodised aluminium body which push fits into the anodised aluminium tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws. 1.5m cable via rear entry cable |
| Input Voltage: | 24v DC |
| Wattage: | 9w |
| Light Output: | 600lm |
| Beam Angle: | 45° |
| Colour Temp: | 2700K warm white |
| Life Span: | Approximately 50,000 hours |
| Installation: | The anodised aluminium sleeve is built into the floor/paving during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws. Suitable drainage should be provided below each fitting to prevent water logging. Micro Waymarkers should not be installed in ground subject to water logging. Connect input cable to cable from an LED power supply using T9962 cable joint or T9963 cable splice kit or T9969 underground joint kit. |
| Finish | 316 stainless steel |
|---|