The Elipta EP20MR16 is a stylish 12v recessed uplight with a choice of 12v MR16 LEDs resulting in a much lower lens temperature, which is important in walkover areas. Fitted with a flush lens as standard and features an adjustable bracket that provides up to 30° of movement from vertical for directional lighting. The light is located by an ‘O’ ring on the body into a sleeve tube. The EP20MR16 comes pre-wired with 3m of 2 core HO7RN-F. To facilitate removal of screws for future re-lamping or other maintenance, apply copper grease to the threads of all screws being fitted for retention of bezels, grills or other top plates or retaining rings. Copper grease resists degradation due to heat and protects against difficulty in removing screws, particularly where stainless steel screws are fitted with aluminium parts. It may also be used on screw threads of screw-off bezels or glare shields.
||The metal sleeve is built in during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an ‘o’-ring.
||The metal sleeve is built in during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an o-ring. Connect input cable to cable from transformer using T9962 cable joint or T9963 cable splice kit.