🎄Merry Christmas and a Happy New Year to all of our customers!🎄

We will be closed from Friday 22nd December 2023 and will re-open Tuesday 2nd January 2024.

Any orders placed after midday Wed 20th Dec will be dispatched Tuesday 2nd January 2024.

Elipta Kensington Outdoor Post Light - E27 - Graphite

Elipta Kensington Outdoor Post Light - E27 - Graphite

Product No: EHH1463-350

58 in stock

Kensington 240v LED outdoor wall & post light - E27 - graphite grey
  • Elipta 3w 330LM 2700K 240V E27 LED Wand Lamp

    Elipta 4w Decorative Teardrop Lamp - E27 Warm White 2700K 400LM

  • Elipta IP66 Junction Box c/w Terminals / Entries - 85 x 85 x 50mm - Black

    Elipta IP66 Junction Box c/w Terminals / Entries - 110 x 110 x 65mm - Black

    Elipta Underground Joint Kit c/w Resin Sealant Pack

    Elipta IP68 Cable Gland c/w Lock Nut - 20mm

    Elipta MPGEL Re-Enterable Clear Sealant 1 Litre Bottle

    Elipta Burial Resin Sealant Pack 350ml

    Elipta 6 Way IP68 Round Junction Box c/w M16 Cable Glands

    Elipta Shark Gel Insulated Joint 6A

    Elipta Square Base Plate St.St. with Polycarbonate Spike

    Elipta 3 Pole IP68 In-Line Cable Connector

    Elipta 3 Pole IP68 In-Line Cable Connector 'Y' Split

  • Product Overview
  • The Elipta Kensington Outdoor Post Light 240v (Graphite) LED outdoor wall light with a unique simplistic design and powder coated, grey finish make it a suitable light for traditional and contemporary style houses. The E27 lamp holder sits within toughened, clear glass panels and allow the use of 'retro-style' filament LED lamps, saving on energy consumption whilst complimenting traditional design features. A choice of LED filament ES-E27, dimmable LED lamps, are also available.


     Powder coated graphite grey 


     Die cast aluminium frame with 4 x toughened, clear glass panels

    IP Rating :


    Input Voltage:


    Light output:



    There are 2 cable glands in the bottom of the fitting which accept up to 10mm diameter cable. One cable gland is blanked off. By removing the blanking plug you can wire in a daisy chain.

    Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation

  • Downloads
  • Reviews

Related Products

Elipta Matrix Bollard Light - Graphite
£147.60 £123.00
Elipta Senatrix Bollard Light - Graphite
£126.00 £105.00
Elipta Box Outdoor Wall Light - E27 Graphite
£80.16 £66.80 £100.20 £83.50
Elipta Larson Wall Light - Graphite
£54.72 £45.60 £68.40 £57.00
Elipta Lumex Outdoor Wall Light - 240v - Grey
£98.40 £82.00
Elipta Jenson Up/Downlight - Graphite
£99.60 £83.00
Elipta Stella Bollard Light - Graphite
£108.00 £90.00
Elipta Kensington Outdoor Wall Light - E27 - Graphite With PIR Sensor
£126.00 £105.00